Seat Lock; 1. Riders Seat; Street Triple And Street Triple R; Daytona 675 And Daytona 675 R - Triumph Daytona 675 Owner's Handbook Manual

Hide thumbs Also See for Daytona 675:
Table of Contents

Advertisement

General Information

Seat Lock

Rider's Seat

Street Triple and Street Triple R

1.
Seat lock
The seat lock is located on the left hand side
of the rear bodywork, in line with the footrest
mounting rail. To remove the seat, insert the
ignition key into the seat lock and turn it
counter-clockwise while pressing down on
the rear of the seat. This will release the seat
from its lock and allow it to be slid rearwards
for complete removal from the motorcycle.
To re-install the seat, engage the seat's
tongue under the fuel tank and press down
at the rear to engage in the seat lock.
An audible click can be heard when the seat
is fully engaged in its lock.
Warning
To prevent detachment of the seat during
riding, after fitting always grasp the seat
and pull firmly upwards. If the seat is not
correctly secured, it will detach from the
lock. A loose or detached seat could cause
loss of motorcycle control and an accident.
60
Rider's Seat

Daytona 675 and Daytona 675 R

1
1

1. Riders seat

2. Fasteners
To remove the riders seat: Remove the
fasteners located beneath the padding. This
will allow the riders seat to slide rearwards for
complete removal from the motorcycle. To re-
install the seat, engage the seat's tongue
under the fuel tank, fit and tighten the
fasteners to 80 lbf-in (9 Nm).
2
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Street tripleDaytona 675 rStreet triple s

Table of Contents