Triumph Daytona 675 Owner's Handbook Manual page 95

Remove the two screws that attach the right
and left hand fairing together.
1
2
1. Fairing
2. Screw
Undo and remove the screws securing the
frame protector (if equipped).
2
1
1. Screw
2. Frame protector
Remove the frame protector.
Maintenance and Adjustment
Remove the two screws securing the fairing
to the frame.
1
chub 2
1. Screw
2. Fairing stud/grommet location
Note:
• The upper and lower fairings are
removed as a single unit.
Detach the lower fairing stud from the frame
grommet.
The upper edge of the fairing is located into
the cockpit with two hooks. The panel must
be moved rearwards until the two hooks are
clear of the slots.
Remove the fairing.
Disconnect the direction turn signal electrical
connectors.
If the coolant level is found to be low, or if
coolant has to be added regularly, inspect
the cooling system for coolant leaks. If
necessary, pressure test the system to
locate the source of the leak and rectify as
necessary. Loss of coolant may cause the
engine to overheat and suffer severe
damage.
2
1
Caution
95