Nikon D700 Repair Manual page 208

AE inspection and adjustment
When MAin PCB is replaced.
Inspection and Adjustment for AE CCD POSITION.
Inspection and Adjustment for M1/8000 ACCURACY.
Inspection and Adjustment for SHUTTER MONITOR.
Inspection for Battery Level Check.
Inspection and Adjustment for AE ACCURACY.
Inspection for APERTURE CONTROL ACCURACY.
Inspection and Adjustment for BUILT-IN SB LIGHT VOLUME .
Inspection and Adjustment for AE SENSOR .
All the adjustments will be made sequentially.
Caution: When the main PCB is replaced, after "writing of fixed value", update the firmware. Then, perform "writing of
fixed value" again.
① AE-CCD positioning inspection/adjustment (
△（Addition）
《RS232C or USB communication》
② Inspeciton of M1/8000 accuracy
③ Inspection/adjustment of Shutter monitor
《RS232C communication》
④ Battery check voltage adjustment (
⑤ Inspection/adjustment of AE accuracy
Caution: Regarding AE accuracy, inspection is not made by using exposure value with shutter tester as seen in the
traditional method. The metering value will appear on PC screen.
Whenever the metering FPC unit is disassembled/replaced or the main PCB is replaced,
Device
Changed page △× 2
Inspection and Adjustment for AE ACCURACY
Writing in Initial values.
For device and details, refer to
(For device and details, refer to
(For device and details, refer to
For device and details, refer to
△（Addition）
《USB or RS232C communication》
J19123
SHUTTER TESTER EF-1(CE)
AF70-300/4-5.6D OR AF-SVR70-300/4.5-5.6
LENS AF70-300/4-5.6D OR LENS AF-SVR70-300/4.5-5.6
- A108 ･ D700 -
When MAin PCB is not replaced.
Select adjustment items individually.
Page A61.）
《RS232C communication》
Page A87.）
Page A88.)
Page A89.)《RS232C communication》
make this adjustment.
J18267
AF50/1.4D
LENS AF50/1.4D
INC
VBA22001-R.3754.A
AF28/2.8D
LENS AF28/2.8D
August, 19,2008