5. Mounting of Front body on Rear body
Mounting of front body on rear body
・ Check the initial position of the charge PCB.
○
OK
・ Check the initial position of the shutter.
○
The shutter curtains are positioned horizontally, so no caulking
is seen on the face.
OK
- A47 ・ D700 -
○
OK
If the position is misaligned, turn the blue gear
as below and adjust so that the indications are
positioned correctly.
×
Caulking is seen on the face.
In case caulking can be seen on the face, apply
voltage (3V) to the charge motor so as to
become initial status.
INC
VBA22001-R.3754.A
NG
- +
3V: