Nikon D700 Repair Manual page 122

Height adjustment of AF coupling shaft
・ Set the position of the focus mode selector dial to "C".
・ Adjust the height of the AF coupling shaft (#342) to "1.7±0.15 mm" with the screw (#359).
※ When the focus mode is set to "S", the shaft must not move.
※ When the focus mode is set to "M", the shaft must NOT protrude
from the bayonet surface.
※ When the release button is fully pressed, the shaft must NOT
protrude from the bayonet surface.
・ Fix the screw (#359) with the adhesive.
Height adjustment of Aperture lever
・ Measure the height of the aperture lever with the tool (J18004).
Standard: 3.35 - 3.45mm
Be careful NOT to bend the lever.
・ In case of nonstandard, make the adjustment by using the adjustment
screw.
Aperture lever
Tool
APERTURE LEVER POSITIONING GAUGE
- A22 ･ D700 -
#359
Adhesive: Screwlock
J18004
INC
VBA22001-R.3754.A
1.7±0.15mm
Bayonet
#342
Adhesive: Screwlock
,
Adjustment
screw