・ Tighten the two screws (#1616) in numeric order ( ① → ② ).
・ Direct the wires of the piezoelectric buzzer (#5065) and AF-assist lamp unit (#B326) outwards.
・ By wrapping the tape [#TA-0005 ( 10×20)], arrange the wire edge of the piezoelectric buzzer (#5065) and
the black and red wires.
Tape (#TA-0005)
Changed page (Overall revision)
②
- A55 ・ D700 -
①
Wire of AF-assist lamp
unit (#B326)
Direct the wires outwards.
Wire of piezoelectric
buzzer (#5065)
INC
VBA22001-R.3754.A
Screw (#1616)×2
August, 19,2008