Nikon D700 Repair Manual page 126

INC
VBA22001-R.3754.A
Power drive
・ Tighten the two screws (#1663).
・ Solder the wires ([Blue][White][Yellow]) and the wires ([Blue][Yellow]) of AF motor.
・Connect the FPC to the connector.
Slacken the 10-pin FPC (#5010).
Screw (#1663)
PD PCB (#5002)
Connection-FPC (#5042)
Wires of AF motor ([Blue][Yellow])
Wires ([Blue][White][Yellow])
・ Insert the 10-pin FPC (#5010) under the wires ([Blue][Black]), then connect it to the connector.
PD PCB (#5002)
10-pin FPC (#5010)
- A26 ･ D700 -