Nikon D700 Repair Manual page 194

● Writing of the image sensor unique data
Because the QR code screen, which was photographed by the procedure of the image adjustment software, is
read with two-dimensional barcode reader and also the unique data of the image sensor is written in the DG
PCB, take a picture beforehand of the QR code, which is attached to the image sensor unit, by a digital camera
BEFORE assembly.
・When the image sensor holder unit is replaced, or the DG-PCB unit and the image sensor holder unit are
replaced, take a picture of the QR code of the image sensor of RP.
・When the DG-PCB unit is replaced, take a picture of the QR code of the image sensor holder unit that is
attached to the body.
【Shooting condition】
Compact digital camera is used:
・Quality:
・Size:
・Shooting mode:BSS
・AF mode:
・SB mode:
【How to confirm】
＊ Perform "QrReader
(J65096)".
code on the playback screen can be read out with two-dimensional barcode reader.
to set two-dimensional barcode reader.)
△（Addition）
△（Addition）
Changed page △× 2
FINE
3M
Closeup mode
Flash cancel
Play back the image of the shot QR code, and confirm that reading of the QR
- A94 ･ D700 -
INC
VBA22001-R.3754.A
(Refer to Page A129 for how
August, 19,2008