Nikon D700 Repair Manual page 157

・ Connect the penta FPC unit to the
connector.
・ Attach the tape [#TA-0005 （ 10×3.7)].
Arrange the wires just under the PCB
so that they do not interfere with the
circle dotted area.
・ Pass the wire [blue] of the battery contact unit (#B822) through the gap between the main PCB and the body.
・ Solder the wire [Blue] of the battery contact unit (#B822) on the FPC.
DC/DC PCB
・ Attach the harness (#5071).
・ Attach the harness (#5070).
Changed page (Overall revision)
Penta FPC unit (#B5005)
FPC of lens contact FPC unit (#B5008)
DC/DC PCB (#5047)
Harness (#5071)
- A57 ･ D700 -
Connector
Tape (#TA-0005)
Wire [Blue]
Harness (#5070)
INC
VBA22001-R.3754.A
August, 19,2008