Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 17 Network > WAN > PIN Setting (PUK)
LABEL
PIN Setup
PUK remaining
authentication times
Please enter a PUK
code
New PIN
Confirm New PIN
Apply
Cancel
4.7 Change PIN Screen
Use this screen to change your SIM card's existing PIN code when there is a SIM card installed in
the WAH7130. Click Network > WAN > Change PIN from the Configuration menu.
Figure 20 Network > WAN > Change PIN
The following table describes the labels in this screen.
Table 18 Network > WAN > Change PIN
LABEL
Change PIN
Old PIN
New PIN
Confirm New PIN
Apply
Cancel
WAH7130 User's Guide
DESCRIPTION
This shows how many times (10 by default) you can enter the PUK code.
If an incorrect PUK code is entered 10 times, the SIM card will be disabled
permanently. You then need to contact your ISP for a new SIM card.
If you enter the PIN code incorrectly three times, the SIM card will be blocked by
your ISP and you cannot use the account to access the Internet. You should get the
PUK (Personal Unblocking Key) code (four to eight digits) from your ISP.
Enter the PUK code to enable the SIM card.
Configure a PIN code for the SIM card. You can specify any four to eight digits to
have a new PIN code or enter the previous PIN code.
Enter the PIN code again for confirmation.
Click Apply to save your changes back to the WAH7130.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Enter the default or existing PIN code for the inserted SIM card.
Configure a new PIN code for the SIM card. You can specify any four to eight digits to
have a new PIN code.
Enter the new PIN code again for confirmation.
Click Apply to save your changes back to the WAH7130.
Click Cancel to begin configuring this screen afresh.
Chapter 4 WAN
39
Advertisement
Table of Contents
