Table of Contents
Advertisement
Chapter 4 WAN
Figure 18 Network > WAN > PIN Setting (Enable)
The following table describes the labels in this screen.
Table 16 Network > WAN > PIN Setting
LABEL
PIN Setup
PIN remaining
authentication times
PIN
Apply
Cancel
The screen appears as shown if the PIN code is entered incorrectly three times.
Figure 19 Network > WAN > PIN Setting (PUK)
38
DESCRIPTION
Select Enable to turn on PIN code authentication. A PIN (Personal Identification
Number) code is a key to a SIM card. Without the PIN code, you cannot use the SIM
card.
Select Disable to turn off PIN code authentication.
This shows how many times (3 by default) you can enter the PIN code.
If you enter the PIN code incorrectly three times, the SIM card will be blocked by
your ISP and you cannot use the account to access the Internet. You will need to
contact your ISP to get a PUK code.
If you select Enable, enter the 4-digit PIN code (0000 for example) provided by your
ISP for the inserted SIM card.
Click Apply to save your changes back to the WAH7130.
Click Cancel to begin configuring this screen afresh.
WAH7130 User's Guide
Advertisement
Table of Contents
