Table of Contents
Advertisement
Chapter 10 Maintenance
The following table describes the labels in this screen.
Table 31 Maintenance > General
LABEL
System Name
Domain Name
Administrator
Inactivity Timer
Apply
Cancel
10.4 Password Screen
It is strongly recommended that you change your WAH7130's password.
If you forget your WAH7130's password (or IP address), you will need to reset the device. See
Section 10.8 on page 75
Click Maintenance > Password. The screen appears as shown.
Figure 38 Maintenance > Password
The following table describes the labels in this screen.
Table 32 Maintenance > Password
LABEL
Old Password
New Password
Retype to Confirm
Apply
Cancel
70
DESCRIPTION
System Name is a unique name to identify the WAH7130 in an Ethernet network.
Enter the domain name you want to give to the WAH7130.
Type how many minutes a management session can be left idle before the session times
out. The default is 5 minutes. After it times out you have to log in with your password
again. Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Click Apply to save your changes back to the WAH7130.
Click Cancel to begin configuring this screen afresh.
for details.
DESCRIPTION
Type the default password or the existing password you use to access the system in
this field.
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Type the new password again in this field.
Click Apply to save your changes back to the WAH7130.
Click Cancel to begin configuring this screen afresh.
WAH7130 User's Guide
Advertisement
Table of Contents
