Basic Setup - Blaupunkt RX+ 35e Instruction Manual

RX+ 35e

Basic Setup

In standby mode press MENU button to set time, date, alarms and language.
Each time that you press this button, it will turn to each setup page.
Time Setup (only in standby mode)
In standby mode you can make time setting.
1. Press and hold the SLEEP/
2. Press MENU button to enter Time Setup interface. In this status, you can see
the hour digit flashing. Then you can adjust the Volume knob to set the correct hour
time: rotate the knob in clockwise direction to increase numbers, and in opposite
direction to decrease.
3. After setting the correct hour time, press ENTER button to confirm. Then the minute
digits will flash and you can set the minute time. The setting method is the same
as the hour setting.
4. Press ENTER button to confirm the time setup.
After time setting, you can make date setting.
Note: when you press MENU button, and select "Time Auto update" to ON, the
clock time will update automatically when the DAB signal is available; if you select
OFF, the unit will show the manual time setting.
5. After you press the ENTER button to confirm time setup, you can see the year time
digits flashing, and you can adjust it with the Volume knob.
The method is the same as for Hour setting.
6. After setting the correct year, press ENTER button to confirm. Then the month digits
will flash and you can set the month time. The setting method is the same as the
Hour setting. Press ENTER button to confirm.
Then you can set the day: the method is the same as above operation.
7. Press ENTER button to confirm the date setup.
Alarm Setup (only in standby mode)
In standby mode, you can make alarms setting. The alarms will turn on the unit in the
mode that you have selected.
1. Press the MENU button repeatedly to enter in the Alarm Setup interface. There are
two alarms.
2. In the alarm setting interface, you can see "Alarm 1 status", and option ON will flash:
adjust the Volume knob in any direction to choose ON or OFF and press ENTER
button to confirm your choice.
3. Then you are required to set the alarm time: first the hour digits flash and the setting
method is the same as in Time Setup.
4. After setting, press ENTER button to confirm. Afterwards you can set the frequency
of Alarm. There are several choices: Once, Daily, Weekdays and Weekends. Adjust
the volume knob to set your choice and press ENTER button to confirm.
5. Press ENTER button and you can set the mode which the unit will be on when the
alarm time is activated. You can choose Buzzer (audible signal), FM, DAB, SD or USB.
If you choose FM, DAB, SD or USB you have to set the volume: the Volume setup
indication appears. Use the Volume knob to adjust the desired volume level and
press ENTER button to confirm.
button to enter to the Standby mode.
55