Dab Operation; Station Selection; Storing Station Presets - Blaupunkt RX+ 35e Instruction Manual

RX+ 35e

DAB Operation

Press SOURCE button repeatedly to switch to the DAB mode.
During scan mode, the LCD will display a slide bar that indicates the progress of the scan,
and the amount of radio stations that have been found so far. Once the scan finished, the
radio will play the first alphanumeric station.

Station selection

To listen to the stations that have been found use the PREV/NEXT buttons to cycle through.
Each time you press these buttons the unit will skip to the previous or next stored station.
Press the ENTER button to activate the station.
Station Scan mode
1. Press the MENU button, then use PREV or NEXT button to find <Station Scan>, press
ENTER button.
2. There are several scan modes: Local Scan, Full Scan, Manual Tune.
Local Scan: search the local DAB channels.
Full Scan: search all DAB channels.
3. If you choose Local Scan or Full Scan, press ENTER to confirm and it will start scanning.
4. Use the PREV or NEXT button to select Manual Tune, and press ENTER.
5. Use the PREV or NEXT button to cycle through the DAB channels, which are
numbered from 5A to 13F.
6. Now press the ENTER button to enter the ensemble/multiplex you want to search.
The screen will display the first station found in the ensemble/multiplex. Press
ENTER button and the first station of the ensemble starts playing.
7. To see which stations are present in the found ensemble/multiplex, just press either
PREV/NEXT buttons. When you have located a station that you would like to listen to,
just press the ENTER button to activate it.

Storing station presets

It is possible to store up to 10 of your favorite stations. This will enable you to access your
favorite stations quickly & easily.
To store a preset station, you must first be listening to the station that you would like to save.
1. Press the PRESET button, the screen will show " Preset X empty" (if any stations have
been preset before, it will show the station name e.g. "BBC Radio4 3")
2. Press the PREV or NEXT button to select the number you want to store.
To confirm preset, press and hold the ENTER button, then it will show "Preset X
3.
saved". For example, if you are listening to BBC World which you want to preset in
no. 5 station: first, press PRESET button, it might show "Preset 1 empty" as there is
no preset station. Then, press PREV or NEXT button to find "Preset 5 empty" (if this
no. 5 has already a preset a station, you can still preset one new station on it). Press
and hold ENTER button, then it will show "Preset 5 saved".
49