Deactivate The Alarm; Language Setup - Blaupunkt RX+ 35e Instruction Manual

RX+ 35e
6. If you choose the alarm mode FM, DAB, SD or USB the unit will
turn on to the corresponding mode and will start playback in that setting volume.
Note: after setting, the alarm logo will be shown on the screen. Then you can set the
second alarm: press the MENU button repeatedly to the "Alarm 2 Status". The method of
Alarm 2 setting is the same as Alarm 1.

Deactivate the alarm

To deactivate the alarm please follow the below steps:
1. Press the MENU button repeatedly to enter Alarm Setup interface.
2. You can see "Alarm 1 status": adjust the Volume knob to choose OFF and press
ENTER button to confirm.
Note: if you set the same time for Alarm 1 and Alarm 2 the Alarm 1 is the priority ring.
Snooze Time
When you choose BUZZER you will hear an audible signal and you can activate the
Snooze mode to delay the alarm for 3 minutes. When the alarm is ringing, adjust the
volume knob to any direction: the audible signal will be off and the alarm will repeat after
3 minutes. You can delay it for another 3 minutes by adjusting the volume knob after the
alarm starts ringing. To cancel the alarm: press the ENTER button once or press and hold
the SLEEP/ button.
NOTE: during the delayed 3 minutes, if you press and hold the SLEEP/
between standby or normal playback mode, the alarm will be canceled.
Alarm in normal playback status
After setting a alarm with Buzzer mode, you can turn the unit to the normal playback
status. When the alarm is ringing and the normal playback pauses, then you can adjust the
volume knob to delay 3 minutes or you can press the ENTER button to cancel the alarm.

Language Setup

You can set the language in Standby mode:
1. Press the MENU button repeatedly to the Language setup interface.
2. You can see Language: English. Adjust the Volume knob in any direction to choose
between English or Deutsch.
3. Press ENTER button to confirm.
Sleep time Setup
This setting is to set the time when the unit will switch automatically in the standby status.
1. Press the SLEEP/
sleep off, 10 minutes, 15 minutes, 30 minutes, 45 minutes, 60 minutes, 90 minutes
or 120 minutes.
2. If you want to select 10 minutes sleep time just use the SLEEP/
through this option: do not touch any buttons for a few seconds, it will return to the
normal playing status and this setting will be saved.
3. When the set time is reached, the unit will switch to the standby mode.
4. To resume normal playback status, press and hold SLEEP/
(Not in standby mode)
button repeatedly to choose between different time periods:
56
button to switch
button to cycle
button.