Camera Settings; Rear-Facing Camera Settings - Motorola ET1 User Manual

ET1 Enterprise Tablet User Guide

6.4 Camera Settings

When in Camera mode, Camera settings are displayed on screen. Touch

6.4.1 Rear-facing Camera Settings

Touch to display the camera setting options.
• Camera Settings - Touch to open a scrolling list of settings:
– Store location - Include location information with each photo using the ET1 global positioning system
(GPS). Options: On or Off (default).
– Focus Mode - Set the focus mode of the camera. Options: Macro, Infinity, Continuous, or Auto (default).
– Capture mode - Set the image capture mode. Options: High Quality (default) or Zero Shutter Mode.
– Picture size - Touch to set the size (in pixels) of the photo. Options: QVGA, VGA, 1M Pixels, 1.3M Pixels,
2M pixels, 3M pixels, 5M pixels, or 8M pixels (default).
– ISO - Set how sensitive the camera is to light. Options: 800, 400, 200, 100, or Auto (default).
– Picture quality - Options: Super fine (default), Fine or Normal.
– Restore defaults - Touch Restore defaults to restore all camera settings to the default values.
• Scene mode - Touch to select a preset combination of camera settings designed for specific scenes.
Options: Auto (default), Portrait, Landscape, Night, Steady photo, or Sports.
• Exposure - Touch to adjust the exposure settings. Options: +3, +2, +1, 0 (default), -1, -2, or -3.
• White balance - Touch to select how Camera adjusts colors in different kinds of light, to achieve the most
natural-looking colors.
– Auto - Adjust the white balance automatically (default).
– Incandescent - Adjust the white balance for incandescent lighting.
– Daylight - Adjust the white balance for daylight.
– Fluorescent - Adjust the white balance for florescent lighting.
– Cloudy - Adjust the white balance for a cloudy environment.
• Flash mode - Touch to set whether Rear-facing Camera relies on its light meter to decide whether a flash is
necessary, or to turn it on or off for all shots.
– Auto - Camera adjusts flash automatically depending upon light meter.
– On - Enable flash upon taking a photo.
– Off - Disable flash (default).
– Torch - Turn flash on continuously.
6-6
for the settings to change.
MN000022A01 - May 2013