ET1 Enterprise Tablet User Guide
Procedure Steps
1
Align the tracks on the side of the battery with the rails in the battery compartment.
Push the battery in until the battery release latch snaps into place.
2
3
If the battery is charged, press and hold the Power button for two seconds until the splash screen appears.
Figure 1-4 Inserting the Battery
1.
Rails
2.
Battery Tracks
1.3.3 Charging the Battery
Ensure that you follow the guidelines for battery safety described in
page
8-1.
1-6
1
2
8.2 Battery Safety Guidelines,
MN000022A01 - May 2013