Battery Optimization; Changing The Screen Timeout Setting; Figure 1-13 Low Battery Notification - Motorola ET1 User Manual

Figure 1-13 Low Battery Notification

The user should replace the battery or charge the ET1 using one of the charging accessories.
When the battery charge drops below 10%, the ET1 goes into critical suspend mode to save data. The screen turns
off. If the Power button is pressed, the Charge LED flashes yellow.
The user must replace the battery or charge the ET1 using one of the charging accessories to retain data.

1.7.3 Battery Optimization

Observe the following battery saving tips:
• Leave the ET1 connected to AC power at all times when not is use.
• Set the screen to turn off after a short period of non-use.
• Reduce screen brightness.
• Turn off all wireless radios when not in use. Note that the global positioning system (GPS) receiver is only turned
on when a GPS application is using GPS.
• Turn off automatic syncing for Email, Calendar, Contacts and other applications.
• Use the Power Control widget to check and control the status of radios, the screen brightness, and syncing.
• Minimize use of applications that keep the ET1 from suspending, for example, music, GPS and video applications.

1.7.3.1 Changing the Screen Timeout Setting

To set the ET1 to turn off after a short period of non-use:
MN000022A01 - May 2013
1.7.3 Battery Optimization
1-15