Handstrap; Figure 1-8 Insert Microsd Card; Figure 1-9 Close Access Door - Motorola ET1 User Manual

ET1 Enterprise Tablet User Guide
10 Insert the microSD card into the card holder.

Figure 1-8 Insert microSD Card

11 Close the access door.

Figure 1-9 Close Access Door

12 Align the tracks on the side of the replacement battery with the rails in the battery compartment.
13 Push the battery in until the battery release latch snaps into place.
14 Press the Power button to turn on the ET1.

1.6 Handstrap

Use the optional 360-degree rotatable handstrap to securely hold the ET1 while working. Refer to the ET1
Enterprise Tablet Integrator Guide for information on installing the handstrap.
Rotate the handstrap for landscape or portrait viewing.
1-12
MN000022A01 - May 2013