Motorola ET1 User Manual page 21

Table 1-1 Features (cont'd.)
Number
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
MN000022A01 - May 2013
Item Function
Back Button — Displays the previous screen. Closes the keyboard if the
on-screen keyboard is open.
P3 Launches the Search application (default). User configurable.
P2 Increases the volume (default). User configurable.
P1 Decreases the volume (default). User configurable.
Touch Screen Displays all information required to operate the ET1.
Camera Flash Provides illumination for rear-facing camera.
Rear-facing Takes photos, videos, and captures bar code data.
Camera
USB Host Provides USB host connection to a peripheral.
Expansion
Module
Scanning Module Provides 1D and 2D bar code scanning.
Scanning/MSR Provides 1D and 2D bar code scanning and magnetic stripe card reading.
Module
Power Button
Press and hold to turn on the ET1. Press to turn on or off the screen.
Press and hold to select one of these options:
• Silent mode - The device is set to vibrate mode; all sounds are
• Airplane mode - Disable all wireless connections.
• Battery swap - Shut down the device when replacing the battery.
• Reset - Reboot the ET1 when software stops responding.
• Power off - Turn off the ET1.
Left Scan/Action Opens the scan application (default). Programmable.
Button
Speakers Provides audio output for video and music playback.
HDMI Output Provides HDMI audio and video signals to an HDMI compatible monitor
Connector or television.
I/O Connector Provides power to the device from cradles and cables and provides USB
client and host communications.
Headset Jack Connects to mono headphones (3-wire, 2.5 mm plug).
Battery
Provides operating power to the ET1.
Battery Latch Releases the battery for removal.
Side LED Indicates battery charge state.
Right Opens the scan application (default). Programmable.
Scan/Action
Button
disabled except for alarms.
1.1 Features
1-3