Programming - Piazzetta P958 Instructions For Installation, Use And Maintenance Manual

6.8 PROGRAMMING

The remote control can be used to select the following functions from the main MENU:
Remote control
MENU ESC
SET OPT
MENU
These functions are activated by opening the front flap and pressing the following keys:
- the MENU key is used to access the main menu and return to the initial display at any time during programming to alter data that has been input
incorrectly;
- the MENU SELECT key is used to scroll through the main menu and the submenus;
- the SET key is used to confirm a MENU or a selection;
- the ESC is used to return to the previous menu display at any time during programming to alter data that has been input incorrectly.
• Whenever the keypad is not used for about 3 ½ minutes, the display goes dark to reduce consumption.
• In a blackout and therefore with no reception by the stove, the display goes dark after about 20 seconds.
• SELECT LANGUAGE
• SET CLOCK
• SET CHRONO
• MULTICOMFORT
• ENERGY SAVING
• MENU PARAMETER
• ENABLE BEEP
• STATE STOVE
• ESC
H07026300 / DT2000786 – 00
SET
LANGUAGE ITALIANO
LANGUAGE PORTUGUES
LANGUAGE FRANCAIS
LANGUAGE ENGLISH
LANGUAGE ESPANOL
LANGUAGE NEDERLAND
LANGUAGE DEUTSCH
SET
DAY MONDAY
DAY TUESDAY
DAY WEDNESDAY
DAY THURSDAY
DAY FRIDAY
DAY SATURDAY
DAY SUNDAY
SET
PROGRAM DAY
PROGRAM WEEK
PROGRAM WEEK-END
SET
SELECT RRC
SELECT STOVE
SET
START
STOP
SET
SETTINGS FACTORY
DATA BANK
SETTINGS LOAD
SETTINGS SMOKE EXT
MULTIFUOCO V1
RESET PARTHOUR
RESET ALARM
LOADING AUGER
MEMORY COUNTERS
SET
SET
MODE BEEP - ON ÷ OFF
DT2012020-01
> key access
> key access
> key access
> key access
> key access
> key access
> key access
HOURS TOTAL
HOURS PARTIAL
NUMBER START
"LAST 5 ALARMS"
31