Band Scope - Yaesu FT3DR Operating Manual

Band Scope

The Spectrum Analyzer presents a view of operating activity on channels above and be-
low the current main band operating frequency as the center.
1. Touch [F MW].
2. Touch [
3. With the current frequency in the center, the signal
strengths of 39 channels bandwidth are shown on a
graph.
4. Touch [STOP].
The band scope scanning stops.
• To resume band scope scanning, touch [SEARCH].
5. To turn the Band Scope OFF, press the [BACK] key.
Press and hold the [DISP] key
scope channels can be changed to 19, 39 or 79.
The band scope channel interval is the same as the VFO frequency step.
32
], and then touch [SCOPE].
［DISPLAY］ ［3 BAND SCOPE］ . The number of band