Jenn-Air SVE47500 Use And Care Manual page 22

When electrical power is supplied or after power interruption, the last clock time
displayed before power was interrupted will flash, Time will advance and continue to
flash until clock is reset.
To set Time of Day
1. Touch Clock Pad.
Indicator word TIME wilt flash and time digits will appear in the Display. (If more than
fifteen seconds elapse between touching Clock Pad and touching a number pad,
the Clock Pad must be touched again in order to set clock.)
2. Touch the appropriate number pads until correct time of day appears in Display.
Note: Four to fifteen seconds after touching the number pads, the time of day will
automatically be entered.
IMPORTANT
• To recall time of day when another time function is showing: Touch Clock Pad.
• Clock time cannot be changed when oven has been programmed for Timed Bake,
Timed Convect Bake, Timed Convect Roast or Self-clean. Cancel program before
reprogramming clock.
22