Appendix C Bios Flash Utility - Leadtek WinFast 6000ABX User Manual

Appendix C BIOS Flash Utility

If you get a new Floppy Diskette or CD_ROM from your local dealer
that contains a new version of the BIOS binary file or you obtain
the new BIOS
(www.leadtek.com.tw)
Please follow the steps described below to update the BIOS.
Step 1 Reboot into DOS environment or "Command Prompt Only" of
Windows95/98
Step 2 Insert the accompany CD into CD-ROM (or floppy disk to Drive
A)
Step 3 Copy "AWDFLASH.EXE" to a new directory from X:\FLASH
sub-directory. (X: means CD-ROM drive letter)
Step 4 Copy the new BIOS binary file to the above said new directory
Step 5 Change to the new directory and type the following command:
AWDFLASH [Filename] /CC ([Filename] means the file
name of BIOS Binary file, /CC : Clear CMOS data)
A message will be displayed on your screen and just follows the
instruction to finish the BIOS updating.
You can also use "AWDFLASH /?" command to get help messages.
Warning: It is recommended that the application to be run under
DOS prompt. In Windows 95/98, please do following: Start your
system when "Starting Windows 95 (or 98)...." message appear,
press F8 immediately to enter the "Startup Menu" and then select the
"Command Prompt Only" option.
WinFast
binary file directly
®
6000ABX User's Manual
from our Web Site
49