Leadtek WinFast 6000ABX User Manual page 22

Standard CMOS Setup
This setup page includes all the items in a
standard AT-compatible
Standard CMOS Setup section for details.
Chipset Features Setup
This setup page includes all the items of
chipset special features.
Features Setup Section for details.
PNP / PC I Configuration Setup
This entry appears if your system supports
PNP / PCI. See PNP / PCI Configuration
Section for details.
Load BEST Defaults
The Load BEST Defaults are settings that
provide the better system performance. This
is Default settings from Leadtek. If the
CMOS data is corrupt or the checksum of
CMOS data is not correct, these defaults will
be loaded.
W83783S Hardware Monitor
Shows status of CPU, System temperatures
and Cooling Fans speed, Vcore etc,.
Save & Exit Setup
Save CMOS value changes to CMOS RAM
and exit setup.
Exit Without Saving
Abandon all CMOS value changes and exit
setup.
®
WinFast
BIOS Features Setup
This setup page includes all the items of
BIOS. See Award special enhanced features. See BIOS
Features Setup Section for details.
Power Management Setup
This entry only appears if your system
See Chipset supports Power Management "Green PC"
standards. See Power Management Section
for setup details.
Load BASIC Defaults
The BASIC defaults have been set to provide
the minimum requirements for your system
to operate. Unless your system has card
compatibility issues we suggest you to use
Load BASIC Defaults.
Integrated Peripherals
This page includes all the items of IDE hard
drive, onboard SCSI device and Programmed
Input / Output features. See Integrated
Peripherals Section.
Password Setting
Change, set or disable password. It allows
you to limit access to the CMOS Setup. See
Password Setting Section.
IDE HDD Auto Detection
The Award BIOS includes this ability in the
event of your being uncertain of your hard
disk's parameters. See Section "Standard
CMOS Setup".
6000ABX User's Manual
19