Saving, Retrieving And Deleting Results; Cleaning And Storing The Instrument - Sanitas SBM 15 Instructions For Use Manual

Repeat the measurement if the flashing icon
the measurement. Please note that you should rest for 5 minutes
between measurements and not talk or move during the measure-
ment. If the icon appears often, please contact your doctor.
Any self-diagnosis and treatment based on the test results may
be dangerous. It is vital to follow your doctor's instructions.
Range of blood pressure values Systolic (in mmHg) Diastolic (in mmHg) Measure
Grade 3: Severe hypertension
Grade 2: Moderate hypertension 160 – 179
Grade 1: Mild hypertension
High-normal
Normal
Optimal
Source: WHO, 1999
The bar graph in the display and the scale on the unit indicate the
range of the blood pressure which has been recorded.
If the values for systolic and diastolic pressure are in two different
WHO ranges (e.g. systolic in the high-normal range and diastolic
pressure in the normal range) the graphic WHO classification on
the unit indicates the higher range (high-normal in the example
described).

6. Saving, retrieving and deleting results

• The results of each successful measurement are stored togeth-
er with date and time. With more than 60 items of measured
data, the earliest items of data measured are lost.
• In order to retrieve measurement results again, press the memory
key (M). First the average value of all saved measurements of this
user memory is displayed (Display "A"). If you continue pressing
is displayed after
> = 180 > = 110
100 – 109
140 – 159 90 – 99
130 – 139 85 – 89
120 – 129 80 – 84
< 120 < 80
WHO classification:
According to WHO Guidelines/Definitions and the latest findings,
the test results can be classified and evaluated according to the
following chart:
Seek medical advice
Seek medical advice
Have it checked regularly by doctor yellow
Have it checked regularly by doctor green
Check it yourself
Check it yourself
the memory button "M", what are in each case the last results
measured are displayed and audibly announced with graphic WHO
classification. You can adjust the volume during the announcement
by pressing the volume key "+" and "-".
• You can clear the memory by pressing and holding "+" and "-"
simultaneously for 5 seconds after pressing the memory key
(M) and selecting the user.
• If you wish to change the user memory, see "Select memory".

7. Cleaning and storing the instrument

• Clean your device and cuff carefully only with a slightly mois-
tened cloth.
• Do not use detergents or solvents.
• On no account must you immerse the computer in water, oth-
erwise liquid can enter it and cause demage.
16
LED is lightning
red
orange
green
green