Saving, Retrieving And Deleting Results; Error Messages/Troubleshooting; Cleaning And Care - Sanitas SBC 27 Instructions For Use Manual

The bar graph in the display and the scale on the unit indicate
the range of the blood pressure which has been recorded.
If the values for systolic and diastolic pressure are in two dif-
ferent WHO ranges (e.g. systolic in the high-normal range
and diastolic pressure in the normal range) the graphic WHO
classification on the unit indicates the higher range (high-
normal in the example described).

6. Saving, retrieving and deleting results

• The results of each successful measurement are stored
together with date and time. With more than 60 items of
measured data, the earliest items of data measured are lost.
• Select the desired user memory by pressing the MEM but-
ton and then the "+" button. Press the MEM button again
to display the average of all saved measurements in the
user memory. Press the MEM button again to display the
average day measurement for the last 7 days. (day: 5.00
a.m. – 9.00 a.m., display A). Press the MEM button again to
display the average night measurement for the last 7 days
(night: 5.00 p.m. – 9.00 p.m., display P). If you continue
pressing the MEM button, the latest individual results are
displayed with date and time.
• To clear the memory, press the MEM button, then the dis-
play shows no. 1. Press the "+" button to select the user
memory and confirm by pressing MEM again. Press and
hold the "+" and keys simultaneously for 5 seconds (the
display will show CLA).
• If you wish to change the user memory, see "Select memory".
7. Error messages / troubleshooting
In case of faults, the E_ message appears in the display.
Error messages can occur when
1. inflation pressure is higher than 300 mmHg E2.
2. blood pressure is unusually high or low E3.
3. you move or talk during the measurement (in addition to
E_, the cardiac arrhythmia icon
E3),
4. the cuff tube is not inserted properly E1.
5. the cuff is inflated for longer than 25 seconds E1.
In the above cases, you must repeat the measurement. Make
sure that the cuff tube is properly inserted and that you do
not move or talk. Re-insert the batteries if necessary, or else
replace them.

8. Cleaning and Care

• Clean your blood pressure computer carefully using only a
slightly moistened cloth.
• Do not use any detergents or solvents.
• Never hold the instrument under water as otherwise liquid
can penetrate and damage the instrument.
• Never place any heavy objects on the instrument.
7
appears in the display