Advertisement
NTI VIDMUX Series 2-Port DVI Video Switch
INSTALLATION
The VIDMUX is a Plug-and-Play device with no special configuration settings and easy installation steps:
1.
Before connecting the VIDMUX to the video sources, make sure the video sources and the monitor are turned OFF.
WARNING! Damage may occur to the CPU if power is not disconnected before connecting or disconnecting
!
cables.
2. Connect the monitor to the DVI female port labeled "MONITOR" on the rear panel of the VIDMUX using a male-to-male DVI-I
cable.
Note: Some monitors need to have their video input type set manually. In this case, select "Digital DVI" as the input
type.
Mating Face of
DVI Female
DVI Enabled
Monitor
3.
Connect the video sources to their corresponding DVI ports labeled "VIDEO 1" and/or "VIDEO 2" on the rear panel of the
VIDMUX using male-to-male DVI-I cables.
HDTV Tuner
Rear View of SE-DVI-2
Monitor
5VDC
+
DVI-IS-xx-MM
DVI-IS-xx-MM
2
Video 1
Video 2
NTI
R
NETWORK
TECHNOLOGIES
INCORPORATED
1275 Danner Dr
Tel:330-562-7070
Aurora, OH 44202
Tel:800-742-8324
www.networktechinc.com
Mating Face of
DVI Male
Rear View of SE-DVI-2
Monitor
Video 2
5VDC
+
Mating Face of
DVI Male
Video 1
NTI
R
NETWORK
TECHNOLOGIES
INCORPORATED
1275 Danner Dr
Tel:330-562-7070
Aurora, OH 44202
Tel:800-742-8324
www.networktechinc.com
Advertisement
