Permanent Settings In Programming Mode; Possible Settings In Programming Mode - Jura GIGA X8 Professional Original Instructions For Use

4 Permanent settings in programming mode

Possible settings in
programming mode
Programme item
'Maintenance
status (1/5)'
'Product settings
(2/5)'
'Machine settings
(3/5)'
'Machine settings
(4/5)'
Press the P button to enter programming mode. You can navigate
through the programme items and permanently save the required
settings simply by turning the Rotary Switch and using the multi-
function buttons. The following settings can be made:
Sub-item
'Clean',
'Change the filter',
'Descale' (only if filter is
not activated),
'Rinse the milk system',
'Rinse the coffee system',
'Clean the milk system'
'Programming',
'Classic-library',
'Set consistency of grind'
'Maintenance settings'
(filter, water hardness,
switch-on rinse, milk
system rinsing),
'Time / date',
'Timer',
'Save energy',
'Units',
'Factory setting'
'Choose language',
'Display',
'Colour scheme',
'Café à la carte'
4 Permanent settings in programming mode
Explanation
T Start the required maintenance programme
here.
T Select your settings for speciality coffees,
milk and hot water.
T Replace the products on the start screen and
in the product selector with your favourites, or
prepare your chosen product directly.
T Adjust the consistency of grind for both
grinders to the coffee beans used.
T Set the water hardness or activate the filter.
T Change the settings for the switch-on rinse
and milk system rinse.
T Set the time after which the GIGA should
switch off automatically.
T Select an energy-saving mode.
T Select the unit for the amount of water.
T Reset the machine or the permanently set
values of all products to the factory settings.
T Select your language.
T Change the display settings.
T Activate the grinder selection.
25