Changing The Filter - Jura GIGA X8 Professional Original Instructions For Use

Changing the filter

E After 100 litres of water have flowed through or after two
months, the filter will cease to work. Your GIGA will automati-
cally prompt you to change the filter.
E If the CLARIS Pro filter cartridge is not activated in program-
ming mode, you will not be prompted to change the filter.
Example: Proceed as follows to change the filter when prompted to
do so.
Precondition: 'Change the filter'
O T Press the P button.
'Maintenance status (1/5)'
T Press the 'Change the filter'
T Press the 'Start'
T Press the 'Start'
'Change filter.' /
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Pro filter
cartridge.
T Insert the new filter cartridge into the water tank, exerting
slight pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
k T Press the Rotary Switch.
'Filter is being
stops automatically.
play.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
'Change the filter' /
The machine heats up.
the display.
and the c symbol are displayed.
button.
button.
button again.
'Press the Rotary Switch.'
rinsed.', the filter is rinsed. Rinsing of the filter
'Empty drip tray.'
'Filter rinsing complete.'
'Please select product:'
5 Maintenance
appears on the dis-
appears on
47