Jura GIGA X8 Professional Original Instructions For Use page 28

4 Permanent settings in programming mode
Product Coffee strength
Pot,
; (extra-mild),
pot 2
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Hot water*
28
Amount
Amount of coffee:
25 ml – 290 ml
Bypass amount of water:
0 ml – 580 ml
(per stroke)
– Water: 25 ml – 450 ml
(Products marked * are also available in 'large' size.)
E In addition to the settings listed, you can reset the values for
all products to the factory settings.
Example: Proceed as follows to choose a bypass amount of water
for coffee in the programme item
ming'.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/5)'
g T Turn the Rotary Switch until the programme item
settings (2/5)'
T Press the 'Programming'
'Programming'
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E You can also select the products in the product selector. To do
this, turn the Rotary Switch to view the product selector.
T Press the 'Coffee'
T Press the 'Amount of added water'
T Press the
bypass amount of water; for example, to '40 ml'.
T Press the 'Save'
More settings
Temperature (low, normal,
high),
grinder on the left and/or
right (as %),
Number of strokes (1–5; set
number is displayed during
preparation),
product name
Temperature (low, normal,
high),
product name
'Product settings (2/5)'
is displayed.
is displayed.
button.
button.
'+' or ' –' button to change the setting for the
button.
/ 'Program-
'Product
button.