Jura GIGA X8 Professional Original Instructions For Use page 44

5 Maintenance
44
T Carefully pull the bottom part of the milk system down and
off.
T Remove the milk system from the dual spout.
T Remove the air intake pipe.
T Dismantle the milk system into its individual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in JURA milk system cleaner and then rinse them thor-
oughly.
T Reassemble the milk system. When doing this, note the
arrows (circled in red in the picture) on the individual parts.