Descaling the machine
J
CAUTION
CAUTION
CAUTION
CAUTION
T Empty the drip tray and coffee grounds container and put
them back into the machine.
'Clean' /
'Cleaning complete.'
Cleaning is now complete. Your GIGA is once more ready for
use.
The GIGA builds up deposits of limescale over time and automati-
cally prompts you to descale it when necessary. The degree of calci-
fication depends on the hardness of your water.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
T Avoid contact with the skin or eyes.
T Rinse off the descaling agent with clean water. Should you get
any descaling agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be dam-
aged and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
If the descaling operation is interrupted, there may be damage to
the machine.
T Allow the descaling programme to run to the end.
If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.
T Clean up any splashes immediately.
E The descaling programme lasts approximately 50 minutes.
E JURA descaling tablets are available from specialised dealers.
E If you use a CLARIS filter cartridge and this is activated, you
will not be prompted to descale.
Example: Proceed as follows to perform descaling when prompted
to do so.
Precondition: 'Decalcify machine.'
O T Press the P button.
'Maintenance status (1/5)'
T Press the
'Descale'
T Press the
'Start'
and the symbol c are displayed.
button.
button.
5 Maintenance
49