IEI Technology ECN-680A-H61 User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Computer Hardware
  5. ECN-680A-H61
  6. User manual

IEI Technology ECN-680A-H61 User Manual

Embedded system with 2nd gen intel core i7/i5/i3 desktop processors, dual dvi, hdmi, gbe, two usb 3.0, four usb 2.0, four com and rohs compliant
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ECN-680A-H61 Em b e d d e d S ys te m
,
IEI Te c h n o lo g y Co rp .
MODEL:
ECN-680A-H61
Em b e d d e d S ys te m with 2n d Ge n In te l® Co re ™
i7/i5/i3 De s kto p P ro c e s s o rs , Du a l DVI, HDMI, Gb E,
Two US B 3.0, Fo u r US B 2.0, Fo u r COM a n d Ro HS Co m p lia n t
Re v. 1.03 – 4 J u ly 2013
Us e r Ma n u a l
P a g e i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECN-680A-H61 and is the answer not in the manual?

Questions and answers

Related Manuals for IEI Technology ECN-680A-H61

Summary of Contents for IEI Technology ECN-680A-H61

  • Page 1 ECN-680A-H61 Em b e d d e d S ys te m IEI Te c h n o lo g y Co rp . MODEL: ECN-680A-H61 Em b e d d e d S ys te m with 2n d Ge n In te l® Co re ™...
  • Page 2 ECN-680A-H61 Em b e d d e d S ys te m Re vis io n Date Version Changes 4 July 2013 1.03 Modified Table 3-3: RS-422/485 Serial Port Pinouts (COM4) 21 September 2012 1.02 Remove light fanless function 3 September 2012 1.01...
  • Page 3 ECN-680A-H61 Em b e d d e d S ys te m Co p yrig h t COP YRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer.

  • Page 4: Table Of Contents

    ECN-680A-H61 Em b e d d e d S ys te m Ta b le o f Co n te n ts 1 INTRODUCTION ......................1 1.1 O ........................2 VERVIEW 1.2 M ....................2 ODEL ARIATIONS 1.3 F ........................3 EATURES 1.4 T...
  • Page 5 ECN-680A-H61 Em b e d d e d S ys te m 3.11.2 DVI Display Device Connection ..............32 3.11.3 HDMI Device Connection ................33 3.11.4 LAN Connection ..................... 33 3.11.5 DB-9 Serial Port Connection ................. 34 3.11.6 RJ-45 Serial Port Connection ................ 36 3.11.7 USB Device Connection .................
  • Page 6 ECN-680A-H61 Em b e d d e d S ys te m 5.1.3 Getting Help ..................... 62 5.1.4 Unable to Reboot after Configuration Changes ..........62 5.1.5 BIOS Menu Bar ....................62 5.2 M ........................63 5.3 A ....................... 64 DVANCED 5.3.1 ACPI Configuration ..................
  • Page 7 ECN-680A-H61 Em b e d d e d S ys te m 6.8 USB 3.0 D ................112 RIVER NSTALLATION 6.9 TPM D ................... 114 RIVER NSTALLATION 6.10 SMM D ................117 RIVER NSTALLATION A SAFETY PRECAUTIONS ..................121 A.1 S ..................
  • Page 8 ECN-680A-H61 Em b e d d e d S ys te m C.6.3 Configure One Key Recovery Server Settings ..........162 C.6.4 Start the DHCP, TFTP and HTTP ..............163 C.6.5 Create Shared Directory ................163 C.6.6 Setup a Client System for Auto Recovery ............164 C.7 O...
  • Page 9 ECN-680A-H61 Em b e d d e d S ys te m Lis t o f Fig u re s Figure 1-1: ECN-680A-H61 ......................2 Figure 1-2: ECN-680A-H61 Front Panel ..................5 Figure 1-3: LED Indicators ......................6 Figure 1-4: ECN-680A-H61 Rear Panel ..................8 Figure 1-5: Physical Dimensions (mm) ..................
  • Page 10 ECN-680A-H61 Em b e d d e d S ys te m Figure 3-26: DB-9 Serial Port Connector ..................35 Figure 3-27: DB-9 Connector Pinout Location ................35 Figure 3-28: RJ-45 Serial Port Connector ..................37 Figure 3-29: RJ-45 RS-232 Serial Port Pinout Location ............37 Figure 3-30: DB-9 Connector Pinout Location ................38...
  • Page 11 ECN-680A-H61 Em b e d d e d S ys te m Figure 6-11: Graphics Driver License Agreement ..............100 Figure 6-12: Graphics Driver Read Me File ................101 Figure 6-13: Graphics Driver Setup Operations ..............101 Figure 6-14: Graphics Driver Installation Finish Screen ............102 Figure 6-15: Intel®...
  • Page 12 ECN-680A-H61 Em b e d d e d S ys te m Figure C-2: Launching the Recovery Tool ................135 Figure C-3: Recovery Tool Setup Menu ...................135 Figure C-4: Command Prompt ....................136 Figure C-5: Partition Creation Commands ................137 Figure C-6: Launching the Recovery Tool ................139 Figure C-7: Manual Recovery Environment for Windows ............139...
  • Page 13 ECN-680A-H61 Em b e d d e d S ys te m Figure C-37: System Backup Complete Window ..............157 Figure C-38: Restore Backup ....................157 Figure C-39: Restore System Backup Complete Window ............158 Figure C-40: Symantec Ghost Window ..................158 P a g e xiii...
  • Page 14 ECN-680A-H61 Em b e d d e d S ys te m Lis t o f Ta b le s Table 1-1: Model Variations ......................2 Table 1-2: Technical Specifications ....................5 Table 1-3: LED Indicators ......................6 Table 2-1: Package List Contents ....................13 Table 3-1: RS-232 Serial Ports Pinouts (COM2) ................35...

  • Page 15: Introduction

    ECN-680A-H61 Em b e d d e d S ys te m Ch a p te r In tro d u c tio n P a g e 1...

  • Page 16: Overview

    1.1 Ove rvie w Figure 1-1: ECN-680A-H61 The ECN-680A-H61 embedded system is with two DVI ports and one HDMI port for dual display. It accepts a 2nd generation Intel® Core™ i7/i5/i3, Celeron® and Pentium® desktop processor and supports one 204-pin 1066/1333 MHz dual-channel DDR3 SDRAM SO-DIMM module up to 8 GB.

  • Page 17: Features

    ECN-680A-H61 Em b e d d e d S ys te m 1.3 Fe a tu re s The ECN-680A-H61 features are listed below:  2nd Generation Intel® Core™ i7/i5/i3, Celeron® and Pentium® desktop processor supported  Intel® HD graphics supports H.264/AVC-MPEG2/VC1, DirectX 10.1 and OpenGL 3.0...
  • Page 18 ECN-680A-H61 Em b e d d e d S ys te m Me m o ry 1 x 204-pin 1066/1333 MHz dual-channel DDR3 SDRAM SO-DIMM slot (system max. 8GB) S to ra g e 1 x 2.5'' SATA HDD bay...

  • Page 19: Front Panel

    ECN-680A-H61 Em b e d d e d S ys te m S to ra g e Te m p e ra tu re -30°C ~ 65°C Op e ra tin g Hu m id ity 5% ~95%, non-condensing Half-sine wave shock 3G, 11ms, 3 shocks per axis Op e ra tin g S h o c k Meet MIL-STD-810F 514.5C-2 (with SSD)

  • Page 20: Led Indicators

    ECN-680A-H61 Em b e d d e d S ys te m 1.5.1 LED In d ic a to rs There are five LED indicator lights located along the front panel of the ECN-680A-H61 (Figure 1-3). Figure 1-3: LED Indicators The descriptions of each LED indicator are listed below.

  • Page 21: Rear Panel

    ECN-680A-H61 Em b e d d e d S ys te m NOTE: If the CPU temperature alert LED shows in red, the user must lower the environments temperature or close some running applications to cool down the CPU. 1.6 Re a r P a n e l The rear panel of the ECN-680A-H61 has the following features (Figure 1-4): ...

  • Page 22: Figure 1-4: Ecn-680A-H61 Rear Panel

    ECN-680A-H61 Em b e d d e d S ys te m Figure 1-4: ECN-680A-H61 Rear Panel P a g e 8...

  • Page 23: Dimensions

    ECN-680A-H61 Em b e d d e d S ys te m 1.7 Dim e n s io n s The physical dimensions are shown below: Figure 1-5: Physical Dimensions (mm) P a g e 9...

  • Page 24: Unpacking

    ECN-680A-H61 Em b e d d e d S ys te m Ch a p te r Un p a c kin g P a g e 10...

  • Page 25: Anti - Static Precautions

    Follow the anti-static precautions outlined in Section 2 .1. 3 3 3 H  Make sure the packing box is facing upwards so the ECN-680A-H61 does not fall out of the box.  Make sure all the components shown in Section 2 .3 are present.

  • Page 26: Unpacking Checklist

    ECN-680A-H61 Em b e d d e d S ys te m 2.3 Un pa c kin g Ch e c klis t NOTE: If some of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the ECN-680A-H61 from or contact an IEI sales representative directly.

  • Page 27: Table 2-1: Package List Contents

    ECN-680A-H61 Em b e d d e d S ys te m Qu a n tity Ite m a n d P a rt Nu m b e r Im a g e RJ-45 to DB-9 COM port cable (P/N: 32005-000200-200-RS)

  • Page 28: Installation

    ECN-680A-H61 Em b e d d e d S ys te m Ch a p te r In s ta lla tio n P a g e 14...

  • Page 29: Installation Precautions

    Electric shock and personal injury might occur if the rear panel of the ECN-680A-H61 is opened while the power cord is still connected to an electrical outlet.

  • Page 30: Memory Module Installation

    ECN-680A-H61 Em b e d d e d S ys te m 3.3 Me m ory Mo d u le In s ta lla tio n To install the memory module, please follow the steps below: S te p 1:...

  • Page 31: Figure 3-3: So-Dimm Socket Location

    ECN-680A-H61 Em b e d d e d S ys te m S te p 4: Lift the fan module out of the ECN-680A-H61 and locate the SO-DIMM socket F igure 3-3). 3 3 6 H Figure 3-3: SO-DIMM Socket Location...

  • Page 32: Cpu Installation

    ECN-680A-H61 Em b e d d e d S ys te m S te p 8: Install the fan module in the same position it was before and tighten the eight fan bracket retention screws. Connect the fan connector (CPU_FAN1).

  • Page 33: Figure 3-6: Disengage The Cpu Socket Load Lever

    ECN-680A-H61 Em b e d d e d S ys te m Disengage the load lever by pressing the lever down and slightly outwards to S te p 4: clear the retention tab. Fully open the lever. See Figure 3-6.

  • Page 34: Figure 3-8: Insert The Cpu

    ECN-680A-H61 Em b e d d e d S ys te m Orientate the CPU properly. The contact array should be facing the CPU S te p 7: socket. S te p 8: Correctly position the CPU. Match the Pin 1 mark with the CPU edge on the CPU socket.

  • Page 35: Hard Disk Drive (Hdd) Installation

    ECN-680A-H61 Em b e d d e d S ys te m Figure 3-9: Close the CPU Socket Install the fan module in the same position it was before and tighten the eight fan S te p 12: bracket retention screws. See Section 3.3.

  • Page 36: Figure 3-10: Hdd Cover Retention Screws

    F igure 3-11). S te p 3: 3 3 6 H Figure 3-11: HDD Bracket Retention Screws Lift the HDD bracket out of the ECN-680A-H61 and slide the HDD to the HDD S te p 4: bracket ( F igure 3-12).

  • Page 37: Figure 3-12: Inserting The Hdd

    ECN-680A-H61 Em b e d d e d S ys te m Figure 3-12: Inserting the HDD Secure the HDD to the HDD bracket using four retention screws ( F igure 3-13). S te p 5: 3 3 6 H...

  • Page 38: W I -F I Antenna Installation (W I -F I Model Only )

    3.7 AT/ATX Mo d e S e le c tio n AT or ATX power mode can be used on the ECN-680A-H61. The selection is made through an AT/ATX switch located on the rear panel (Figure 3-15). To select AT mode or ATX mode, follow the steps below.

  • Page 39: At Power Mode

    3.7.2 ATX P owe r Mo d e With the ATX mode selected, the ECN-680A-H61 panel PC goes in a standby mode when it is turned off. The panel PC can be easily turned on via network or a power switch in standby mode.

  • Page 40: Reset The System

    ECN-680A-H61 Em b e d d e d S ys te m  Security surveillance  Point-of-Sale (POS)  Advertising terminal 3.8 Re s e t th e S ys te m The reset button enables user to reboot the system when the system is turned on. To reboot the system, follow the steps below.

  • Page 41: Mount The System

    ECN-680A-H61 Em b e d d e d S ys te m S te p 2: Once turned off, the power LED will be off. Figure 3-17: Power Button Location 3.10 Mo u n t th e S ys te m The ECN-680A-H61 supports wall mounting.

  • Page 42: Mounting The System With Mounting Brackets

    ECN-680A-H61 Em b e d d e d S ys te m 3.10.1 Mo u n tin g th e S ys te m with Mo u n tin g Bra c ke ts To mount the embedded system onto a wall or some other surface using the two mounting brackets, please follow the steps below.

  • Page 43: External Peripheral Interface Connectors

    ECN-680A-H61 Em b e d d e d S ys te m NOTE: To have the best system heat dissipation, please make sure to face the I/O panel downward ( F igure 3-19) when mounting the system. 3 4 1 H...

  • Page 44: Figure 3-20: Peripheral Connectors (Front Panel)

    ECN-680A-H61 Em b e d d e d S ys te m Figure 3-20: Peripheral Connectors (Front Panel) Figure 3-21: Peripheral Connectors (Rear Panel) P a g e 30...

  • Page 45: Audio Connector

    ECN-680A-H61 Em b e d d e d S ys te m 3.11.1 Au d io Co n n e c to r The audio jacks on the front panel enable the ECN-680A-H61 to be connected to a stereo sound setup. To install the audio devices, follow the steps below.

  • Page 46: Dvi Display Device Connection

    3.11.2 DVI Dis p la y De vic e Co n n e c tio n The ECN-680A-H61 has one female DVI-I connector and one female DVI-D connector on the rear panel. The DVI connectors are connected to digital display devices. To connect a digital display device to the ECN-680A-H61, please follow the instructions below.

  • Page 47: Hdmi Device Connection

    3.11.3 HDMI De vic e Co n n e c tio n The HDMI connector transmits a digital signal to compatible HDMI display devices such as a TV or computer screen. To connect the HDMI cable to the ECN-680A-H61, follow the steps below.

  • Page 48: Serial Port Connection

    3.11.5 DB-9 S e ria l P o rt Co n n e c tio n There are two RS-232 DB-9 connectors and one RS-422/485 DB-9 connector of the ECN-680A-H61 for serial device connection. Follow the steps below to connect a serial device to the DB-9 connector of the ECN-680A-H61.

  • Page 49: Figure 3-26: Db-9 Serial Port Connector

    ECN-680A-H61 Em b e d d e d S ys te m Figure 3-26: DB-9 Serial Port Connector Secure the connector. Secure the serial device connector to the external S te p 3: interface by tightening the two retention screws on either side of the connector.

  • Page 50: Serial Port Connection

    3.11.6 RJ -45 S e ria l P o rt Co n n e c tio n There is one RJ-45 connector of the ECN-680A-H61 for serial device connection. Follow the steps below to connect a serial device to the RJ-45 serial port connector of the ECN-680A-H61.

  • Page 51: Figure 3-28: Rj-45 Serial Port Connector

    ECN-680A-H61 Em b e d d e d S ys te m Figure 3-28: RJ-45 Serial Port Connector S te p 4: Secure the connector. Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector.

  • Page 52: Usb Device Connection

    There are four USB 2.0 connectors and two USB 3.0 connectors on the ECN-680A-H61. To connect a USB device, please follow the instructions below. Locate the USB connectors. The locations of the USB connectors are shown S te p 1: in Chapter 1.

  • Page 53: Figure 3-31: Usb Device Connection

    ECN-680A-H61 Em b e d d e d S ys te m Figure 3-31: USB Device Connection Insert the device connector. Once aligned, gently insert the USB device S te p 3: connector into the onboard connector. P a g e 39...

  • Page 54: System Motherboard

    ECN-680A-H61 Em b e d d e d S ys te m Ch a p te r S ys te m Mo th e rb o a rd P a g e 40...

  • Page 55: Overview

    ECN-680A-H61 Em b e d d e d S ys te m 4.1 Ove rvie w The ECN-680A-H611 embedded system motherboard comes with a number of peripheral interface connectors and configuration jumpers. 4.1.1 La yo u t The connector locations are shown in Figure 4-1. The connector pinouts for these connectors are listed in the following sections.

  • Page 56: Peripheral Interface Connectors

    4.1.2 P e rip h e ra l In te rfa c e Co n n e c to rs The table below shows a list of the peripheral interface connectors on the ECN-680A-H61. Detailed descriptions of these connectors can be found below.

  • Page 57: Battery Connector

    ECN-680A-H61 Em b e d d e d S ys te m Co n n e c to r Typ e La b e l SATA power connectors 2-pin wafer CN1, CN2 SMBus connector 4-pin wafer SMBUS1 SO-DIMM connector SO-DIMM connector...

  • Page 58: Fan Connector (Cpu)

    ECN-680A-H61 Em b e d d e d S ys te m Figure 4-3: Battery Connector Location Description Battery+ Ground Table 4-2: Battery Connector Pinouts 4.2.2 Fa n Co n n e c to r (CP U) CN La b e l:...

  • Page 59: Led Module Connector

    ECN-680A-H61 Em b e d d e d S ys te m Figure 4-4: CPU Fan Connector Location Description +V12S FANPWM1 FANIN1 Table 4-3: CPU Fan Connector Pinouts 4.2.3 LED Mo d u le Co n n e c to r...

  • Page 60: Logo Led Connectors

    ECN-680A-H61 Em b e d d e d S ys te m Figure 4-5: LED Module Connector Location Description 3.3VALWAYS LED_GND LED_GND PWR_ON_LED# CPU_TEMP_H# CPU_TEMP_L# SUS_LED# SATA_LED# AT_LED# ATX_LED# Table 4-4: LED Module Connector Pinouts 4.2.4 Lo g o LED Co n n e c to rs...

  • Page 61: Pcie Mini Card Slot

    ECN-680A-H61 Em b e d d e d S ys te m Figure 4-6: Logo LED Connector Locations Description +V5A Table 4-5: Logo LED Connector Pinouts 4.2.5 P CIe Min i Ca rd S lo t CN La b e l:...

  • Page 62: Figure 4-7: Pcie Mini Card Slot Location

    ECN-680A-H61 Em b e d d e d S ys te m Figure 4-7: PCIe Mini Card Slot Location Description Description PCIE_WAKE# VCC3 1.5V CLK- CLK+ PCIRST# VCC3 PCIRST# PERN2 3VDual PERP2 1.5V SMBCLK PETN2 SMBDATA PETP2 USBD- USBD+ P a g e 48...

  • Page 63: Serial Port Connectors

    ECN-680A-H61 Em b e d d e d S ys te m 1.5V VCC3 Table 4-6: PCIe Mini Card Slot Pinouts 4.2.6 RS -232 S e ria l P o rt Co n n e c to rs CN La b e l:...

  • Page 64: Rs-422/485 Serial Port Connector

    ECN-680A-H61 Em b e d d e d S ys te m NSOUT2 Table 4-7: Serial Port Connector Pinouts (COM2) Description Description -NDCD3 -NCTS3 -NDSR4 -NDTR3 NSIN3 -XRI3 -NRTS3 NSOUT3 Table 4-8: Serial Port Connector Pinouts (COM3) 4.2.7 RS -422/485 S e ria l P ort Co n n e c to r...

  • Page 65: Sata Drive Connectors

    ECN-680A-H61 Em b e d d e d S ys te m TXD485 TXD485# Table 4-9: RS-422/485 Serial Port Connector Pinouts 4.2.8 S ATA Drive Co n n e c to rs CN La b e l: S ATA1, S ATA2...

  • Page 66: Sata Power Connectors

    ECN-680A-H61 Em b e d d e d S ys te m 4.2.9 S ATA P o we r Co n n e c to rs CN La b e l: CN1, CN2 2-pin wafer CN Typ e : CN Lo c a tio n :...

  • Page 67: So-Dimm Connector

    ECN-680A-H61 Em b e d d e d S ys te m Figure 4-12: SMBus Connector Location Description SMB_DATA SMB_CLK_A +V5S Table 4-12: SMBus Connector Pinouts 4.2.11 S O-DIMM Co n n e c to r CN La b e l:...

  • Page 68: Speaker Connector

    ECN-680A-H61 Em b e d d e d S ys te m Figure 4-13: SO-DIMM Connector Locations 4.2.12 Sp e a ke r Co n n e c to r CN La b e l: S P EAKER1 4-pin wafer...

  • Page 69: Spi Flash Connector

    ECN-680A-H61 Em b e d d e d S ys te m DESCRIPTION SPK_L SPK_R Table 4-13: SPDIF Connector Pinouts 4.2.13 S P I Fla s h Co n n e c to r CN La b e l: J S P I2...

  • Page 70: Spi Flash Connector (Ec)

    ECN-680A-H61 Em b e d d e d S ys te m 4.2.14 S P I Fla s h Co n n e c to r (EC) CN La b e l: J S P I1 6-pin wafer CN Typ e :...

  • Page 71: Usb 2.0 Connectors

    ECN-680A-H61 Em b e d d e d S ys te m The K type thermocouple connector connects to the K type thermocouple devices. Figure 4-17: Type K Thermocouple Connector Locations Description Table 4-16: Type K Thermocouple Connector Pinouts 4.2.16 US B 2.0 Co n n e c to rs...

  • Page 72: Jumper Settings

    ECN-680A-H61 Em b e d d e d S ys te m Figure 4-18: USB Connector Locations Description Description VCC_USB -DATA +DATA VCC_USB -DATA1 +DATA Table 4-17: USB Port Connector Pinouts 4.3 J u m p e r S e ttin g s...

  • Page 73: Clear Cmos

    J u m p e r Lo c a tio n : If the ECN-680A-H61 fails to boot due to improper BIOS settings, the clear CMOS jumper clears the CMOS data and resets the system BIOS information. To do this, use the jumper cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1 and 2.

  • Page 74: Bios

    ECN-680A-H61 Em b e d d e d S ys te m Ch a p te r BIOS P a g e 60...

  • Page 75: Introduction

    ECN-680A-H61 Em b e d d e d S ys te m 5.1 In tro d u c tio n The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed.

  • Page 76: Getting Help

    ECN-680A-H61 Em b e d d e d S ys te m Ke y Fu n c tio n F4 key Save all the CMOS changes Table 5-1: BIOS Navigation Keys 5.1.3 Ge ttin g He lp When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears.

  • Page 77: Main

    ECN-680A-H61 Em b e d d e d S ys te m 5.2 Ma in The Main BIOS menu ( B IOS Menu 1) appears when the BIOS Setup program is entered. 3 6 6 H The Main menu gives an overview of the basic system information.

  • Page 78: Advanced

    ECN-680A-H61 Em b e d d e d S ys te m  iWDD Ve rs io n  The iWDD Version displays the current iWDD version. The fields in iWDD Version cannot be changed.  Me m o ry In fo rm a tio n The Memory Information lists a brief summary of the on-board memory.

  • Page 79: Acpi Configuration

    ECN-680A-H61 Em b e d d e d S ys te m Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit > ACPI Settings System ACPI Parameters > RTC Wake Settings >...

  • Page 80: Rtc Wake Settings

    ECN-680A-H61 Em b e d d e d S ys te m  ACP I S le e p Sta te [S 1 (CP U Sto p Clo c k)] Use the ACPI Sleep State option to specify the sleep state the system enters when it is not being used.

  • Page 81: Trusted Computing

    ECN-680A-H61 Em b e d d e d S ys te m  The real time clock (RTC) cannot generate a wake Disabled EFAULT event  Enabled If selected, the Wake up every day option appears allowing you to enable to disable the system to wake every day at the specified time.

  • Page 82: Cpu Configuration

    ECN-680A-H61 Em b e d d e d S ys te m  TPM S u p p o rt [Dis a b le ] Use the TPM Support option to configure support for the TPM.  TPM support is disabled.

  • Page 83: Cpu Information

    ECN-680A-H61 Em b e d d e d S ys te m  In te l Virtu a liza tio n Te c h n o lo g y [En a b le d ] Use the Intel Virtualization Technology option to enable or disable virtualization on the system.

  • Page 84: Sata Configuration

    ECN-680A-H61 Em b e d d e d S ys te m  Processor Cores: Lists the number of the processor core  Intel HT Technology: Indicates if Intel HT Technology is supported by the CPU.  Intel VT-x Technology: Indicates if Intel VT-x Technology is supported by the CPU.

  • Page 85: Usb Configuration

    ECN-680A-H61 Em b e d d e d S ys te m  S e ria l-ATA Co n tro lle r 0 [Co m pa tib le ] Use the Serial-ATA Controller option to configure the Serial-ATA controller mode when the SATA mode is set to IDE Mode.

  • Page 86: F81866 Super Io Configuration

    ECN-680A-H61 Em b e d d e d S ys te m  US B De vic e s The USB Devices Enabled field lists the USB devices that are enabled on the system  Le g a c y US B S u p p o rt [En a b le d ] Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support.

  • Page 87: Serial Port N Configuration

    ECN-680A-H61 Em b e d d e d S ys te m 5.3.7.1 S e ria l P o rt n Co n fig u ra tio n Use the Serial Port n Configuration menu ( B IOS Menu 11) to configure the serial port n.
  • Page 88 ECN-680A-H61 Em b e d d e d S ys te m  Serial Port I/O port address is 3F8h and the interrupt IO=3F8h; IRQ=3, 4 address is IRQ3, 4  IO=2F8h; Serial Port I/O port address is 2F8h and the interrupt...

  • Page 89: Change Settings [Auto]

    ECN-680A-H61 Em b e d d e d S ys te m  Serial Port I/O port address is 2E8h and the interrupt IO=2E8h; IRQ=3, 4 address is IRQ3, 4 5.3.7.1.3 S e ria l P o rt 3 Co n fig u ra tio n ...

  • Page 90: Device Mode [Rs422/485]

    ECN-680A-H61 Em b e d d e d S ys te m 5.3.7.1.4 S e ria l P o rt 4 Co n fig u ra tio n  S e ria l P o rt [En a b le d ] Use the Serial Port option to enable or disable the serial port.

  • Page 91: H/W Monitor

    ECN-680A-H61 Em b e d d e d S ys te m 5.3.8 H/W Mo n ito r The H/W Monitor menu (BIOS Menu 12) shows the hardware health status. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.

  • Page 92: Console Redirection Settings

    ECN-680A-H61 Em b e d d e d S ys te m Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced COM1 Console Redirection Console Redirection [Disabled] Enable or Disable. > Console Redirection Settings --------------------- : Select Screen COM2 ↑...

  • Page 93: Terminal Type [Ansi]

    ECN-680A-H61 Em b e d d e d S ys te m Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced COM0 Emulation: ANSI: Console Redirection Settings Extended ASCII char set. VT100: ASCII char set. Terminal Type [ANSI]...

  • Page 94: I E I Feature

    ECN-680A-H61 Em b e d d e d S ys te m  The transmission speed is 115200 115200 EFAULT 5.4 iEi Fe a tu re Use the iEi Feature menu (BIOS Menu 15) to configure the auto recovery function.

  • Page 95: Chipset

    ECN-680A-H61 Em b e d d e d S ys te m 5.5 Ch ips e t Use the Chipset menu ( B IOS Menu 16) to access the Northbridge and Southbridge 3 8 0 H configuration menus WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction.

  • Page 96: Northbridge Configuration

    ECN-680A-H61 Em b e d d e d S ys te m 5.5.1 No rth b rid g e Co n fig u ra tio n Use the Northbridge Chipset Configuration menu ( B IOS Menu 17) to configure the 3 8 1 H Northbridge chipset.

  • Page 97: Southbridge Configuration

    ECN-680A-H61 Em b e d d e d S ys te m 5.5.2 S o u th b rid g e Co n fig u ra tio n Use the Southbridge Configuration menu ( B IOS Menu 18) to configure the Southbridge 3 8 2 H chipset.
  • Page 98 ECN-680A-H61 Em b e d d e d S ys te m  onboard High Definition Audio controller Enabled EFAULT automatically detected and enabled  Aza lia in te rn a l HDMI c o d e c [En a b le d ] Use the Azalia internal HDMI codec option to enable or disable the internal HDMI codec for High Definition Audio.

  • Page 99: Intel Igd Swsci Opregion

    ECN-680A-H61 Em b e d d e d S ys te m 5.5.3 In te l IGD S WS CI Op Re g io n Use the Intel IGD SWSCI OpRegion menu ( B IOS Menu 19) to configure the video device 3 8 3 H connected to the system.

  • Page 100: Boot

    ECN-680A-H61 Em b e d d e d S ys te m  Maximum EFAULT  IGD - Bo o t Typ e [VBIOS De fa u lt] Use the IGD - Boot Type option to select the display device used by the system when it boots.
  • Page 101 ECN-680A-H61 Em b e d d e d S ys te m  Does not enable the keyboard Number Lock automatically. To use the 10-keys on the keyboard, press the Number Lock key located on the upper left-hand corner of the 10-key pad. The Number Lock LED on the keyboard lights up when the Number Lock is engaged.

  • Page 102: Security

    ECN-680A-H61 Em b e d d e d S ys te m  Bo o t Op tio n #1 [S ATA P M: S AMS UNG…] Use Boot Option #1 to enable or disable booting from the detected drive.

  • Page 103: Hdd Security Configuration

    ECN-680A-H61 Em b e d d e d S ys te m  Us e r P a s s wo rd Use the User Password to set or change a user password. 5.7.1 HDD S e c u rity Co n fig u ra tio n Use the HDD Security Configuration submenu (BIOS Menu 22) to set HDD password.

  • Page 104: Exit

    ECN-680A-H61 Em b e d d e d S ys te m NOTE: It is recommended that the system be reset after setting a new HDD password. 5.8 Exit Use the Exit menu ( B IOS Menu 23) to load default BIOS values, optimal failsafe values 3 8 5 H and to save configuration changes.

  • Page 105: Restore User Defaults

    ECN-680A-H61 Em b e d d e d S ys te m  Re s to re De fa u lts Use the Restore Defaults option to load the optimal default values for each of the parameters on the Setup menus. F3 key can be used for this operation.

  • Page 106: Software Drivers

    ECN-680A-H61 Em b e d d e d S ys te m Chapter S o ftwa re Drive rs P a g e 92...

  • Page 107: Available Software Drivers

    ECN-680A-H61 Em b e d d e d S ys te m 6.1 Ava ila b le S o ftwa re Drive rs NOTE: The content of the CD may vary throughout the life cycle of the product and is subject to change without prior notice. Visit the IEI website or contact technical support for the latest updates.

  • Page 108: Chipset Driver Installation

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-1: Drivers 6.3 Ch ips e t Drive r In s ta lla tio n To install the chipset driver, please do the following. S te p 1: Access the driver list.

  • Page 109: Figure 6-2: Chipset Driver Screen

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-2: Chipset Driver Screen When the setup files are completely extracted the Welcome Screen in Figure S te p 5: 6-3 appears. S te p 6: Click Next to continue.

  • Page 110: Figure 6-4: Chipset Driver License Agreement

    ECN-680A-H61 Em b e d d e d S ys te m Read the License Agreement. S te p 8: Click Yes to continue. S te p 9: Figure 6-4: Chipset Driver License Agreement The Read Me file in Figure 6-5 appears.

  • Page 111: Figure 6-5: Chipset Driver Read Me File

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-5: Chipset Driver Read Me File Setup Operations are performed as shown in Figure 6-6. S te p 12: Once the Setup Operations are complete, click Next to continue.

  • Page 112: Graphics Driver Installation

    ECN-680A-H61 Em b e d d e d S ys te m Select “Yes, I want to restart this computer now” and click Finish.S te p 0: S te p 15: Figure 6-7: Chipset Driver Installation Finish Screen 6.4 Gra p h ic s Drive r In s ta lla tio n To install the Graphics driver, please do the following.

  • Page 113: Figure 6-8: Graphics Driver Read Me File

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-8: Graphics Driver Read Me File The installation files are extracted. See Figure 6-9. S te p 6: Click Next to continue. S te p 7: Figure 6-9: Graphics Driver Setup Files Extracted The Welcome Screen in Figure 6-10 appears.

  • Page 114: Figure 6-10: Graphics Driver Welcome Screen

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-10: Graphics Driver Welcome Screen The License Agreement in Figure 6-11 appears. S te p 10: Click Yes to accept the agreement and continue. S te p 11: Figure 6-11: Graphics Driver License Agreement The Read Me file in Figure 6-12 appears.

  • Page 115: Figure 6-12: Graphics Driver Read Me File

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-12: Graphics Driver Read Me File Setup Operations are performed as shown in Figure 6-13. S te p 14: Once the Setup Operations are complete, click Next to continue.

  • Page 116: Lan Driver Installation

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-14: Graphics Driver Installation Finish Screen 6.5 LAN Drive r In s ta lla tio n To install the LAN driver, please do the following. S te p 1: Access the driver list.

  • Page 117: Figure 6-15: Intel® Network Connection Menu

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-15: Intel® Network Connection Menu The Welcome screen in Figure 6-16 appears. S te p 6: Figure 6-16: LAN Driver Welcome Screen Click Next to continue. S te p 7: The License Agreement in Figure 6-17 appears.

  • Page 118: Figure 6-17: Lan Driver License Agreement

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-17: LAN Driver License Agreement Accept the agreement by selecting “I accept the terms in the license S te p 9: agreement”. S te p 10: Click Next to continue.

  • Page 119: Figure 6-18: Lan Driver Setup Options

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-18: LAN Driver Setup Options The Ready to Install the Program screen in Figure 6-19 appears. S te p 14: Click Install to proceed with the installation.

  • Page 120: Audio Driver Installation

    ECN-680A-H61 Em b e d d e d S ys te m Click Finish to exit. S te p 18: Figure 6-20: LAN Driver Installation Complete 6.6 Au d io Drive r In s ta lla tio n To install the audio driver, please do the following.

  • Page 121: Figure 6-21: Audio Driver Welcome Screen

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-21: Audio Driver Welcome Screen The audio driver installation begins. See Figure 6-22. S te p 6: Figure 6-22: Audio Driver Installation P a g e 107...

  • Page 122: W I -F I Driver Installation

    ECN-680A-H61 Em b e d d e d S ys te m When the installation is complete, the screen in Figure 6-23 appears. S te p 7: Select “Yes, I want to restart my computer now” and click Finish. S te p 8:...

  • Page 123: Figure 6-24: License Agreement

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-24: License Agreement Accept the conditions of the license agreement and click NEXT to continue. S te p 4: The Setup Type screen in Figure 6-25 appears.

  • Page 124: Figure 6-26: Configuration Tool

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-26: Configuration Tool Select “Ralink Configuration Tool”and click NEXT to continue. S te p 8: The Ready to Install the Program screen in Figure 6-27 appears. S te p 9: Figure 6-27: Ready to Install the Program Click Install to proceed with the installation.

  • Page 125: Figure 6-28: Setup Status

    ECN-680A-H61 Em b e d d e d S ys te m The Setup Status screen in Figure 6-28 appears and displays the progress of S te p 11: the installation. Figure 6-28: Setup Status S te p 12: When the driver installation is complete, the screen in Figure 6-29 appears.

  • Page 126: Usb 3.0 Driver Installation

    ECN-680A-H61 Em b e d d e d S ys te m 6.8 US B 3.0 Drive r In s ta lla tio n To install the USB 3.0 driver, please do the following. S te p 1: Access the driver list. (See Section 6.2) Click “USB 3.0”...

  • Page 127: Figure 6-31: Usb 3.0 Driver Choose Install Location

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-31: USB 3.0 Driver Choose Install Location The program is ready to install (Figure 6-32). S te p 8: Click I to continue. S te p 9: NS TALL Figure 6-32: USB 3.0 Driver Choose Install Location...

  • Page 128: Tpm Driver Installation

    ECN-680A-H61 Em b e d d e d S ys te m When the driver installation is complete, the screen in Figure 6-33 appears. S te p 10: Click Finish to exit. S te p 11: S te p 0: Figure 6-33: USB 3.0 Driver Installation Complete...

  • Page 129: Figure 6-34: Tpm Professional Package Screen

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-34: TPM Professional Package Screen Click I to continue. (Figure 6-35) S te p 6: NS TALL Figure 6-35: Install TPM Professional Package Screen The Welcome Screen in Figure 6-36 appears.

  • Page 130: Figure 6-36: Tpm Driver Welcome Screen

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-36: TPM Driver Welcome Screen The program is preparing to install (Figure 6-37). S te p 8: Figure 6-37: TPM Driver Install Screen P a g e 116...

  • Page 131: Ismm Driver Installation

    ECN-680A-H61 Em b e d d e d S ys te m When the driver installation is complete, the screen in Figure 6-33 appears. S te p 9: Click Finish to exit. S te p 10: S te p 0: Figure 6-38: TPM Driver Installation Complete 6.10 iS MM Drive r In s ta lla tio n...

  • Page 132: Figure 6-39: Ismm Installation Welcome Screen

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-39: iSMM Installation Welcome Screen Click N to continue the installation process. S te p 5: The License Agreement window appears. Accept the license agreement by S te p 6: clicking “I accept the terms in the license agreement”...

  • Page 133: Figure 6-41: Ismm Installation Customer Information

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-41: iSMM Installation Customer Information Fill out the information and click N S te p 8: Select a setup type in Figure 6-42 and click N S te p 9: Figure 6-42: iSMM Setup Type The Ready to Install the Program in Figure 6-43 appears.

  • Page 134: Figure 6-43: Ready To Install The Program Window

    ECN-680A-H61 Em b e d d e d S ys te m Figure 6-43: Ready to Install the Program Window Click I to start the software installation. S te p 11: NSTALL After the driver installation process is complete, a confirmation screen S te p 12: appears (Figure 6-44).

  • Page 135: A Safety Precautions

    ECN-680A-H61 Em b e d d e d S ys te m Appendix S a fe ty P re c a u tio n s P a g e 121...

  • Page 136: Safety Precautions

    ECN-680A-H61 Em b e d d e d S ys te m WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the ECN-680A-H61. A.1 S a fe ty P re c a u tio n s Please follow the safety precautions outlined in the sections that follow: A.1.1 Ge n e ra l S a fe ty P re c a u tio n s...

  • Page 137: Cpu Temperature Warning

    Electrostatic discharge (ESD) can cause serious damage to electronic components, including the ECN-680A-H61. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the ECN-680A-H61 is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.

  • Page 138: Product Disposal

    When maintaining or cleaning the ECN-680A-H61, please follow the guidelines below. A.2.1 Ma in te n a n c e a n d Cle a n in g Prior to cleaning any part or component of the ECN-680A-H61, please read the details below.

  • Page 139: Cleaning Tools

    Some components in the ECN-680A-H61 may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the ECN-680A-H61. ...

  • Page 140: B Bios Menu Options

    ECN-680A-H61 Em b e d d e d S ys te m Appendix BIOS Me n u Op tio n s P a g e 126...
  • Page 141 ECN-680A-H61 Em b e d d e d S ys te m  BIOS Information .........................63  iWDD Vendor ........................63  iWDD Version ........................64  Memory Information ......................64  System Date [xx/xx/xx] ......................64  System Time [xx:xx:xx] .......................64  ACPI Sleep State [S1 (CPU Stop Clock)] ................66 ...
  • Page 142 ECN-680A-H61 Em b e d d e d S ys te m  WIFI Support [Enabled] .......................84  DVMT Mode Select [DVMT Mode] ..................85  DVMT Memory [Maximum] ....................85  IGD - Boot Type [VBIOS Default] ..................86  Bootup NumLock State [On] ....................86 ...

  • Page 143: C One Key Recovery

    ECN-680A-H61 Em b e d d e d S ys te m Ap p e n d ix On e Ke y Re c o ve ry P a g e 129...

  • Page 144: One Key Recovery Introduction

    ECN-680A-H61 Em b e d d e d S ys te m C.1 On e Ke y Re c o ve ry In tro d u c tio n The IEI one key recovery is an easy-to-use front end for the Norton Ghost system backup and recovery tool.

  • Page 145: System Requirement

    ECN-680A-H61 Em b e d d e d S ys te m After completing the five initial setup procedures as described above, users can access the recovery tool by pressing <F3> while booting up the system. The detailed information of each function is described in Section C.5.

  • Page 146: Supported Operating System

    ECN-680A-H61 Em b e d d e d S ys te m partitions. Please take the following table as a reference when calculating the size of the partition. OS Image after Ghost Compression Ratio Windows® 7 7 GB 5 GB Windows®...

  • Page 147: Setup Procedure For Windows

    ECN-680A-H61 Em b e d d e d S ys te m Ubuntu 8.10 (Intrepid) Ubuntu 7.10 (Gutsy) Ubuntu 6.10 (Edgy) Debian 5.0 (Lenny) Debian 4.0 (Etch) SuSe 11.2 SuSe 10.3 NOTE: Installing unsupported OS versions may cause the recovery tool to fail.

  • Page 148: Hardware And Bios Setup

    ECN-680A-H61 Em b e d d e d S ys te m C.2.1 Ha rdwa re a n d BIOS S e tu p Make sure the system is powered off and unplugged. S te p 1: Install a hard drive or SSD in the system. An unformatted and unpartitioned disk S te p 2: is recommended.

  • Page 149: Figure C-2: Launching The Recovery Tool

    ECN-680A-H61 Em b e d d e d S ys te m Figure C-2: Launching the Recovery Tool S te p 3: The recovery tool setup menu is shown as below. Figure C-3: Recovery Tool Setup Menu S te p 4: Press <6>...

  • Page 150: Figure C-4: Command Prompt

    ECN-680A-H61 Em b e d d e d S ys te m Figure C-4: Command Prompt S te p 5: The command prompt window appears. Type the following commands (marked in red) to create two partitions. One is for the OS installation; the other is for saving recovery files and images which will be an invisible partition.

  • Page 151: Figure C-5: Partition Creation Commands

    ECN-680A-H61 Em b e d d e d S ys te m Figure C-5: Partition Creation Commands P a g e 137...

  • Page 152: Install Operating System, Drivers And Applications

    ECN-680A-H61 Em b e d d e d S ys te m NOTE: Use the following commands to check if the partitions were created successfully. S te p 6: Press any key to exit the recovery tool and automatically reboot the system.

  • Page 153: Building The Recovery Partition

    ECN-680A-H61 Em b e d d e d S ys te m C.2.4 Bu ild in g th e Re c o ve ry P a rtitio n Put the recover CD in the optical drive. S te p 1: Start the system.

  • Page 154: Figure C-8: Building The Recovery Partition

    ECN-680A-H61 Em b e d d e d S ys te m S te p 5: The Symantec Ghost window appears and starts configuring the system to build a recovery partition. In this process the partition created for recovery files in Section C.2.2 is hidden and the recovery tool is saved in this partition.

  • Page 155: Create Factory Default Image

    ECN-680A-H61 Em b e d d e d S ys te m C.2.5 Cre a te Fa c to ry De fa u lt Im a g e NOTE: Before creating the factory default image, please configure the system to a factory default environment, including driver and application installations.

  • Page 156: Figure C-12: About Symantec Ghost Window

    ECN-680A-H61 Em b e d d e d S ys te m Figure C-12: About Symantec Ghost Window Use mouse to navigate to the option shown below (Figure C-13). S te p 4: Figure C-13: Symantec Ghost Path S te p 5: Select the local source drive (Drive 1) as shown in Figure C-14.

  • Page 157: Figure C-14: Select A Local Source Drive

    ECN-680A-H61 Em b e d d e d S ys te m Figure C-14: Select a Local Source Drive S te p 6: Select a source partition (Part 1) from basic drive as shown in Figure C-15. Then click OK.

  • Page 158: Figure C-16: File Name To Copy Image To

    ECN-680A-H61 Em b e d d e d S ys te m Figure C-16: File Name to Copy Image to When the Compress Image screen in Figure C-17 prompts, click High to make S te p 8: the image file smaller.

  • Page 159: Figure C-18: Image Creation Confirmation

    ECN-680A-H61 Em b e d d e d S ys te m The Proceed with partition image creation window appears, click Yes to S te p 9: continue. Figure C-18: Image Creation Confirmation The Symantec Ghost starts to create the factory default image (Figure C-19).

  • Page 160: Auto Recovery Setup Procedure

    ECN-680A-H61 Em b e d d e d S ys te m S te p 12: The recovery tool main menu window is shown as below. Press any key to reboot the system. S t e p 0 : Figure C-21: Press Any Key to Continue C.3 Au to Re c o ve ry S e tu p P ro c e d u re...

  • Page 161: Figure C-22: Auto Recovery Utility

    ECN-680A-H61 Em b e d d e d S ys te m Figure C-22: Auto Recovery Utility Reboot the system from the recovery CD. When prompted, press any key to S te p 3: boot from the recovery CD. It will take a while to launch the recovery tool. Please...

  • Page 162: Figure C-25: Building The Auto Recovery Partition

    ECN-680A-H61 Em b e d d e d S ys te m S te p 5: The Symantec Ghost window appears and starts configuring the system to build an auto recovery partition. In this process the partition created for recovery files in Section C.2.2 is hidden and the auto recovery tool is saved in this partition.

  • Page 163: Figure C-27: Image Creation Complete

    ECN-680A-H61 Em b e d d e d S ys te m The Symantec Ghost starts to create the factory default image (Figure C-27). S te p 7: Figure C-27: Image Creation Complete S te p 8: After completing the system configuration, press any key in the following window to restart the system.

  • Page 164: Setup Procedure For Linux

    ECN-680A-H61 Em b e d d e d S ys te m Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced iEi Feature Auto Recovery Function Reboot and recover Auto Recovery Function [Disabled] system automatically within 10 min, when OS crashes.

  • Page 165: Figure C-29: Partitions For Linux

    ECN-680A-H61 Em b e d d e d S ys te m Hardware and BIOS setup. Refer to Section C.2.1. S te p 1: Install Linux operating system. Make sure to install GRUB (v0.97 or earlier) S te p 2: MBR type and Ext3 partition type.

  • Page 166: Figure C-30: Manual Recovery Environment For Linux

    ECN-680A-H61 Em b e d d e d S ys te m DISKPART>sel disk 0 DISKPART>create part pri size= DISKPART>assign letter=N DISKPART>exit system32>format N: /fs:ntfs /q /v:Recovery /y system32>exit S te p 4: Build the recovery partition. Press any key to boot from the recovery CD. It will take a while to launch the recovery tool.

  • Page 167: Figure C-31: Access Menu.lst In Linux (Text Mode)

    ECN-680A-H61 Em b e d d e d S ys te m Figure C-31: Access menu.lst in Linux (Text Mode) Modify the menu.lst as shown below. S te p 6: The recovery tool menu appears. (Figure C-32) S te p 7: Figure C-32: Recovery Tool Menu Create a factory default image.

  • Page 168: Recovery Tool Functions

    ECN-680A-H61 Em b e d d e d S ys te m C.5 Re c o ve ry To o l Fu n c tio n s After completing the initial setup procedures as described above, users can access the recovery tool by pressing <F3>...

  • Page 169: Factory Restore

    ECN-680A-H61 Em b e d d e d S ys te m WARNING: All data in the system will be deleted during the system recovery. Please backup the system files before restoring the system (either Factory Restore or Restore Backup).

  • Page 170: Backup System

    ECN-680A-H61 Em b e d d e d S ys te m Figure C-35: Recovery Complete Window C.5.2 Ba c ku p S ys te m To backup the system, please follow the steps below. Type <2> and press <Enter> in the main menu.

  • Page 171: Restore Your Last Backup

    ECN-680A-H61 Em b e d d e d S ys te m Figure C-37: System Backup Complete Window C.5.3 Re s to re Yo u r La s t Ba c ku p To restore the last system backup, please follow the steps below.

  • Page 172: Manual

    ECN-680A-H61 Em b e d d e d S ys te m Figure C-39: Restore System Backup Complete Window C.5.4 Ma n u a l To restore the last system backup, please follow the steps below. Type <4> and press <Enter> in the main menu.

  • Page 173: Restore Systems From A Linux Server Through Lan

    ECN-680A-H61 Em b e d d e d S ys te m C.6 Re s to re S ys te m s fro m a Lin u x S e rve r thro u g h LAN The One Key Recovery allows a client system to automatically restore to a factory default image saved in a Linux system (the server) through LAN connectivity after encountering a Blue Screen of Death (BSoD) or a hang for around 10 minutes.

  • Page 174: Configure Dhcp Server Settings

    ECN-680A-H61 Em b e d d e d S ys te m C.6.1 Co n fig u re DHCP S e rve r S e ttin g s Install the DHCP S te p 1: #yum install dhcp (CentOS, commands marked in red)

  • Page 175: Configure Tftp Settings

    ECN-680A-H61 Em b e d d e d S ys te m filename “pxelinux.0”; C.6.2 Co n fig u re TFTP S e ttin g s S te p 1: Install the tftp, httpd and syslinux. #yum install tftp-server httpd syslinux...

  • Page 176: Configure One Key Recovery Server Settings

    ECN-680A-H61 Em b e d d e d S ys te m Debian Replace the TFTP settings from “inetd” to “xinetd” and annotate the “inetd” by adding “#”. #vi /etc/inetd.conf Modify: #tftp dgram udp wait root /usr/sbin..(as shown below) #vi /etc/xinetd.d/tftp...

  • Page 177: Start The Dhcp, Tftp And Http

    ECN-680A-H61 Em b e d d e d S ys te m C.6.4 Sta rt th e DHCP, TFTP a n d HTTP Start the DHCP, TFTP and HTTP. For example: CentOS #service xinetd restart #service httpd restart #service dhcpd restart Debian #/etc/init.d/xinetd reload...

  • Page 178: Setup A Client System For Auto Recovery

    ECN-680A-H61 Em b e d d e d S ys te m Modify: [image] comment = One Key Recovery path = /share/image browseable = yes writable = yes public = yes create mask = 0644 directory mask = 0755 S te p 4: Edit “/etc/samba/smb.conf”...
  • Page 179 ECN-680A-H61 Em b e d d e d S ys te m Continue to configure the Boot Option Priorities BIOS option of the client S te p 2: system: Boot Option #1  remain the default setting to boot from the original OS.
  • Page 180 ECN-680A-H61 Em b e d d e d S ys te m NOTE: A firewall or a SELinux is not in use in the whole setup process. If there is a firewall or a SELinux protecting the system, modify the configuration information to accommodate them.

  • Page 181: Other Information

    ECN-680A-H61 Em b e d d e d S ys te m C.7 Oth e r In fo rm a tio n C.7.1 Us in g AHCI Mo d e o r ALi M5283 / VIA VT6421A Co n tro lle r...
  • Page 182 ECN-680A-H61 Em b e d d e d S ys te m When the following window appears, press <S> to select “Specify Additional S te p 5: Device”. In the following window, select a SATA controller mode used in the system. Then S te p 6: press <Enter>.

  • Page 183: System Memory Requirement

    ECN-680A-H61 Em b e d d e d S ys te m S te p 7: After pressing <Enter>, the system will get into the recovery tool setup menu. Continue to follow the setup procedure from Step 4 in Section C.2.2 Create Partitions to finish the whole setup process.

  • Page 184: D Watchdog Timer

    ECN-680A-H61 Em b e d d e d S ys te m Appendix Wa tc h d o g Tim e r P a g e 170...
  • Page 185 ECN-680A-H61 Em b e d d e d S ys te m NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux.

  • Page 186: Example Program

    ECN-680A-H61 Em b e d d e d S ys te m NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. Example program: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 05 ;time-out value is 5 seconds...

  • Page 187: E Hazardous Materials Disclosure

    ECN-680A-H61 Em b e d d e d S ys te m Ap p e n d ix Ha za rd o u s Ma te ria ls Dis c lo s u re P a g e 173...

  • Page 188: Hazardous Materials Disclosure Table For Ipb Products Certified As R Ohs Compliant Under 2002/95/Ec Without Mercury

    ECN-680A-H61 Em b e d d e d S ys te m E.1 Ha za rd o u s Ma te ria ls Dis c lo s u re Ta ble for IP B P ro d u c ts...
  • Page 189 ECN-680A-H61 Em b e d d e d S ys te m P a rt Na m e To xic o r Ha za rd o u s S u b s ta n c e s a n d Ele m e n ts...

  • Page 190: P A G E X

    ECN-680A-H61 Em b e d d e d S ys te m 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本 产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 醚 (P b ) (Hg ) (Cd ) (CR(VI)) (P BB) (P BDE) 壳体...

Table of Contents