Airwell AWSI YIFA060–H13 Service Manual page 22

Table of Contents

Advertisement

Timing
The largest timing time is 24 hours, minimum scale is 1 min, single timing style, timing function will keep valid when mode change,
and indication lamp keep light once set.
Timing off
Only when the unit is running, this function can be set, set range is 1min-24h and unit will automatically shutdown when time runs
out.
Timing on
Only when the unit is running, this function can be set, set range is 1min-24h and unit will automatically shutdown when time runs
out. Turn on or turn off after timing set, original timing and sleeping functions will be canceled automatically.
Sleeping
The sleeping function is valid in auto, cooling, dehumidifying, heating operation, indoor fan blows low wind once enters into sleeping
mode and sleeping indication lamp turns to light. Press the sleep button and enters to sleeping operation, for cooling operation the
set temperature raises by 1℃ 1 h later, and for heating operation the set temperature descends by 2℃ 1 h later. After another 1h
operation, for cooling operation the set temperature raises by 1℃ again, and for heating operation the set temperature descends by
2℃ again. After the sleeping mode runs for 7h the unit shutdown.
When enters into sleeping operation, mode switch will be valid, however sleeping function will be cancel after mode switch and if
press "temperature +" button the unit will adjust temperature according to" new set temperature + amending temperature."
At the state of sleeping mode, press "sleep" button, mode button or turn off the unit, the sleeping mode will be canceled.
Long Distance
a) Control board has function of long distance control
b) The switch of long distance control can be masked through indoor unit DIP switch.
c) When long distance switch is off and unit turns off, the remote controller and wired controller shall not be able to turn on the unit.
d) When long distance switch is on and unit starts in auto mode, mode can be changed by remote controller or wired controller.
CONTROL SYSTEM
21 | S e r v i c e M a n u a l

Advertisement

Table of Contents
loading

This manual is also suitable for:

Faf 060 – n11

Table of Contents