Register The License (Registration Key) - Panasonic WJ-NV300K Installation Manual

Register the license (Registration Key)

When using the recorder for the first time, or to increase number of the cameras to be connected, it is necessary to register the
license (Registration Key) of the recorder.
Important:
• In the following cases,
the recorder is rebooted.
• When the Registration Key of
• When the licenses of the additional camera kit or any other additional/extension kit is added
• The added cameras shall be registered on "Easy start" (
Each setting value is the default. Configure each setting according to your needs.
Step 1
Obtain the "Registration Key" for the recorder by following
the instructions on the provided "Activation Key Card".
To increase number of the connected camera, get the addi-
tional camera registration key number described on the
Activation Key Card packaged in the Additional Camera Kit
(WJ-NVE30, WJ-NVE30W: optional) When using the extra
functions, obtain the "Registration Key" for Additional
Business Intelligence Kit WJ-NVF30, WJ-NVF30W (option).
Refer to the "Activation Key Card" for further information.
Step 2
Start the recorder. (☞ Page 34)
When the system check is complete, the operational
→ →
screen will be displayed on the main monitor. If the
license for the recorder has not been registered yet, the
message asking you to register the license will be dis-
played.
Step 3
Click the [Setup] button.
36
the recorder must be rebooted by clicking the [Restart] button. The licenses will not be effective until
the recorder is registered
☞ page 41) or on the "Camera registration" tab.
The setup menu will be displayed.
→ →
Step 4
Click [Advanced setup] - [Maintenance] - the [System man-
agement] tab on the setup menu.
The "System management" page will be displayed.
→ →