Register The Recorder And Cameras, And Confirm The Result (Manual Registration) - Panasonic WJ-ND300 Network Setup Manual

Register the recorder and cameras, and confirm
the result (Manual Registration)
Register the edited settings in the recorder and the camera. When not registered, the edited settings will not be
applied to the recorder.
Screenshot 1
Start operation when the search result is displayed on
the main window.
Step 1
Select the icon of the recorder to be registered.
Step 2
Click the [Manual Registration] button.
Step 3
Click the [OK] button when the confirmation window is
displayed.
Important:
• To register the newly detected camera (
recorder, the camera icon should be the edited icon
( ). (page 16)
• Any recording currently being performed on the
recorder will stop in the process of "Manual
Registration".
Notes:
• Edit of the settings of the cameras that are not
applicable with this software (
eras registered with the host name (
unavailable.
• IP addresses can automatically be assigned to up to
32 cameras.
) in the
) and of the cam-
) is
19