Turn Off The Power Of The Recorder - Panasonic WJ-NV300K Installation Manual

Turn off the power of the recorder

Turn off the power of the recorder. Follow the procedure below to turn off the power.
Step 1
During recording, "Off" for "Recording mode" on the "REC &
event" page - [Advanced setup] tab of the setup menu to
stop all recordings. (☞ Operating Instructions (PDF))
Note:
• Be sure to perform the operation to start recording (select "On" for "Recording mode") after turning on the power of the
recorder again.
Important:
• Remove the plug from the outlet if not operating the recorder for a long period.
• Turn on the power (around once a week), and perform recording/playback to prevent interferences with functions.
Step 2
Unplug the power plug from the outlet after confirming that
the [REC] indicators are off.
The [OPERATE] indicator will go off.
→ →
35