Connection of extension units
Up to 2 extension units (optional) can be connected with a single network disk recorder. Connect the recorder and the extension
unit using the connection cable provided with the extension unit.
Connect the extension units (WJ-HDE400) as shown in the illustration below. Refer also to the operating instructions of the
extension unit.
When the extension units are connected, the RAID5 or RAID6 function will become available.
Refer to the Operating Instructions (PDF) for descriptions of how to use the RAID function.
Fix the connection cable
Attach the cable clamp to each
connection cable.
Important:
•
Use only the dedicated connection cable provided with the extension unit when connecting the recorder and the extension
unit.
•
Fix the connection cable firmly using the cable clamp provided with the extension unit. When the cable is not connected
firmly or when it is disconnected, the system may become unstable or recording may fail.
•
Do not bind the looped cable.
28
AC IN
SIGNAL GND
HDD 2
VIDEO
AUDIO
OUT
CONTROL
Connection cable
(provided with the extension unit)
Extension unit (unit number 2)
Extension unit (unit number 1)
Recorder
HDD 1
ALARM/
EXT STORAGE
10/100/1000BASE-T
AV OUT
VIDEO OUT
2
1
PC
CAMERA/PC
2
1
MAIN
SUB