Security Jacket Component Replacement Procedures; Card Reader Cover And Top Cap - HP ElitePad 1000 G2 Maintenance And Service Manual

5. Remove the credit card reader (5).
Reverse this procedure to install the credit card reader.

Security Jacket component replacement procedures

There are as many as 13 screws that must be removed, replaced, and/or loosened when servicing the
Security Jacket. Make special note of each screw size and location during removal and replacement.

Card reader cover and Top cap

Description
Card reader cover
Top cap (includes rubber trim)
Before disassembling the Security Jacket, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet or the
Security Jacket.
3. Disconnect all external devices from the Security Jacket.
Remove the card reader cover and top cap:
Security Jacket component replacement procedures
Spare part number
744039-001
744047-001
77