Updating The Bios; Determining The Bios; Downloading A Bios Update - HP ElitePad 1000 G2 Maintenance And Service Manual

Updating the BIOS

Updated versions of the BIOS may be available on the HP website.
Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs.
Some download packages contain a file named Readme.txt, which contains information regarding installing
and troubleshooting the file.

Determining the BIOS

To decide whether you need to update Computer Setup (BIOS), first determine the BIOS version on
your computer.
BIOS version information (also known as ROM date and System BIOS) can be accessed by pressing
you are already in Windows) or by using Computer Setup.
1. Start Computer Setup. See
2. Select Main, and then select System Information.
3. To exit Computer Setup without saving your changes, select the Exit icon in the lower-right corner
of the screen, and then follow the on-screen instructions.
‒ or –
Select Main, select Ignore Changes and Exit, and then press enter.
To check for later BIOS versions, see

Downloading a BIOS update

CAUTION:
and install a BIOS update only when the computer is connected to reliable external power using the AC
adapter. Do not download or install a BIOS update while the computer is running on battery power, docked in
an optional docking device, or connected to an optional power source. During the download and installation,
follow these instructions:
Do not disconnect power on the computer by unplugging the power cord from the AC outlet.
Do not shut down the computer or initiate Sleep.
Do not insert, remove, connect, or disconnect any device, cable, or cord.
1. Type support in the taskbar search box, and then select the HP Support Assistant app.
‒ or –
Select the question mark icon in the taskbar.
2. Select Updates, and then select Check for updates and messages.
3. Follow the on-screen instructions.
4. At the download area, follow these steps:
a. Identify the most recent BIOS update and compare it to the BIOS version currently installed on
your computer. Make a note of the date, name, or other identifier. You may need this information
to locate the update later, after it has been downloaded to your hard drive.
b. Follow the on-screen instructions to download your selection to the hard drive.
Make a note of the path to the location on your hard drive where the BIOS update is downloaded.
You will need to access this path when you are ready to install the update.
88 Chapter 6 Computer Setup (BIOS), TPM, and HP Sure Start – Windows 10
Starting Computer Setup on page
Downloading a BIOS update on page
To reduce the risk of damage to the computer or an unsuccessful installation, download
86.
88.
fn+esc (if