Carf-Models BAE Hawk Mk 66 Assembly Manual page 17

Skygate series

Hide thumbs Also See for BAE Hawk Mk 66:

Table of Contents

Fig. 37

The aileron servo linkage is made up using the M3 x 90mm threaded rod with 3mm ball link at one end

and M3 aluminium clevis with 3mm pin at the servo end. Add a length of brass or carbon tube to the

outside of the pushrod for extra strength if deired. Attach the ball link end to the aileron horns with the M3

x 15 allen screw and nyloc nut supplied. Once you are happy with aileron throws and movement you can

affix the supplied plastic fairings to cover the mechansim. The servo hatch / mount is fixed to the wing

with 2.9 x 10mm sheet metal screws.

Fig. 39

Flap

The flap surfaces are installed for you at the factory

with beautiful scale hinging. What remains is for you to

install the servo and linkage. CARF Models

recommend a 25kg torque digital servo like the JR

DS8711 for the flap surfaces.

We have used a JR aluminium arm at 38mm between

centres for the flap. Drill the servo arm at 38mm Ø3mm

and install the aluminium clevis supplied. Install the

Skygate Collection

BAE Hawk Mk 66

Fig. 38

Fig. 40

Fig. 41

Table of Contents