Sleep Timer - Carrier p3 series Owners And Installation Manual

UNIT OPERATION

Sleep Timer

This function enables the user to automatically switch off the unit.
A
A
SLEEP
ON/OFF
TEMP.
SLEEP
SLEEP
PROCEDURE ............................................................................................................................
If you want to stop the operation after 3 hours from now,
1
Press the SLEEP button 3 times, 3:hr will be displayed and the
will be flashing.
2
After 5 seconds, the stopping time will be displayed.
3
The unit operates in sleep mode for 3 hours and will switch off at
1
the end of the 3 hours.
4
To change the reserved time or to cancel, press the SLEEP Button again.
1:hr
NOTE
• When the SLEEP timer is set, the luminosity of the unit lamps will be dimmed
so as not to interrupt sleep.
• The SLEEP timer can be combined with the ON timer.
2:hr 3:hr 7:hr 9:hr
SLEEP signal
Cancel
13