Gas Leak Check; Finishing - Carrier p3 series Owners And Installation Manual

GAS LEAK CHECK

After connecting the pipe, check the joints for gas leakage with gas leak detector or soapy water.

FINISHING

• Wrap the piping joints with the pipe insulation and fasten it with vinyl tape. ( Figure. 17, 18)
• Fill the gap between the inside of wall sleeve and the pipe with a sealer so that rain and wind does not enter. ( Figure. 19 )
Pipe insulation Wall sleeve
Pipe
Wall cap
Pipe
Sealer(Putty)
Saddle
(Vinyl tape)
Indoor side Outdoor side
Wall
Figure 19
Figure 17 Figure 18
29