Sleep Timer - Carrier G Series Heating Owner's Manual

UNIT OPERATION

Sleep Timer

This function enables the user to automatically switch off the unit.
A
A
ON/OFF
TEMP
MODE
SLEEP
SLEEP
• When the SLEEP timer is set, the luminosity of the unit lamps will be dimmed so as not to interrupt the sleep.
• The SLEEP timer can be combined with the ON timer.( Refer to p.17 for combination )
SLEEP
.
FAN FLAP
PROCEDURE
If you want to stop the operation after 3 hours from now.
1
Press the SLEEP button 3 times
• 3:hr will be displayed and the
flashing.
• After 5 seconds, the stopping time will be displayed.
• The unit operates in sleep mode for 3 hours and will
switch off at the end of the 3 hours.
• To change the reserved time or to cancel,
press the SLEEP Button again.
1:hr 2:hr 3:hr
2
When the SLEEP Timer is set, the unit will control the
set temperature to avoid overcooling or overheating
in operation.
Set temperature is changed as shown below.
C
+0.5 C
SET
TEMP.
30
SET TIME
FOR COOLING OR DRY MODE
C
SET
–1 C
TEMP.
30 90
SET TIME
FOR HEATING MODE
NOTE
,
OWNER S MANUAL - 19
signal will be
SLEEP
7:hr 9:hr Cancel
+0.5 C
+0.5 C
+0.5 C
70 110 150
–1 C
–1 C
150
TIME (MIN.)
TIME (MIN.)