Setting The Off Timer; Setting The Daily Timer; Cancelling On, Off And Daily Timer; Setting The Sleep Timer - Carrier Air Conditioner Owner's Manual

5. Fan speed:
Choose the fan speed, using
been completed, press button
fan speed icon will stop flashing.
6. Louver positioning:
Use , to select desired louver position. Press
confirmation. Now all icons are fixed on display. To can-
cel selections made up to this point, push C; to cancel all
of the selected options once the timer has been set,
push and then C. The ON Timer settings are now
complete.
Setting the Off Timer —
select a time for the system to turn off.
1. Press the Off Timer button.
The Off timer icon and numbers for a
time selection flash.
NOTE: This function can be set even if
the remote control is OFF.
2. Setting the Off time (buttons
).
To set the Off time, press either button
or
To move from hour to minute, press
.
Press
setting.
Setting the DAILY Timer —
ton when the ON or OFF timer is active. The
icon will appear on display.
In this way the ON and OFF timer settings will be repeated
every day.
To deactivate the daily function, press
EXAMPLE 1: Combining the ON, OFF and DAILY timer
features.
To start the unit at 5:30 P.M. and stop at 10:30 P.M. for one
day only, complete the following steps:
1. Set the ON timer for 5:30 P.M.
2. Set the OFF timer for 10:30 P.M.
3. Select desired operating mode (
PM
EXAMPLE 2: To stop operation at 10:30 P.M. and start again
at 7:30 A.M. with the same operating mode, complete the fol-
lowing steps:
1. Set the OFF timer for 10:30 P.M. while the system is
operating.
2. Set the ON timer for 7:30 A.M.
PM
. When the selection has
for confirmation. The
for
Set the Off Timer to
and
.
again to confirm Off time
Push the but-
again.
).
PM
AM
For everyday operation to start at 5:30 P.M. and stop at
10:30 P.M. complete the following steps:
1. Set the ON timer for 5:30 P.M.
2. Set the OFF timer for 10:30 P.M.
3. Press the DAILY timer button
PM
PM
CANCELLING THE ON, OFF AND DAILY TIMER
SETTINGS — To cancel the ON or OFF timer setting, press
the following buttons in order:
NOTE: Everyday operation will remain
active until one of the two timers (ON
or OFF) is active.
PM
Setting the Sleep Timer —
to set the SLEEP timer with the system on. The icon
will appear on the display.
This procedure permits setting the remaining unit operating
time until the Sleep mode is entered.
1. "1:hr" will be displayed together with the
icon.
2. Press
following settings in sequence: 1:hr, 2:hr,
3:hr, 4:hr, 5:hr, 6:hr, 7:hr, 8:hr and 9:hr.
3. Once the remaining operating hours have been selected
with either button
confirm.
4. When the SLEEP timer is set, the unit will control the set
temperature to avoid overcooling or overheating during
operation. The set temperature will change as in Fig. 10.
8
.
PM
1. Button or ;
2. Button C.
To deactivate the Daily timer func-
tion, press .
Press this button
. The display will show the
or , press the button to