Troubleshooting - Lilliput FA1045 User Manual

7. TROUBLE
SHOOTING
Only black-and-white image
Make the level of color saturation and brightness is
proper. Power on but no picture
Make sure the AV &VGA &HDMI&DVI&YPBPR&S connector cable is
tightly connected from the video out connector AV &VGA
&HDMI&DVI&YPBPR&S connector signal output connector. Make sure
you are using the standard power adapter coming with the monitor.
Wrong or abnormal colors
If any color is missing, check the cables to make sure it is securely
connected. Broken or loose pins in the cable connector can cause a bad
connection.
Remote controller doesn't work
Check the battery to make sure the battery is installed properly and make sure
it is not a low battery. The signal is interfered by some obstructions.
Please try to reset if any abnormal matters happened
8. REMARK:
If there are still any problems, you can connect with the related deals
*If interruptive image occurs, it maybe that the VGA signal frequency isn't matched
with normal standard
*It is a normal condition that some bright lines appear on the screen when you turn
the unit.
Note: due to constant effort to improve products and product
features, specifications may change without notice.
.