Denon ADV-1000 Service Manual page 11

QQ
3 7 63 1515 0
3. Traverse Unit disassembly
(1) Remove 24P FFC (CX241), 15P FFC (CX151), 5P
PH WIRE (CX051) and 3P PH WIRE (CX031)
connecting with from the DVD Main P.W.B.
(2) Remove 4 screws of
(3) Remove Traverse Unit to arrow direction.
TE
L 13942296513
Note for disassembly Traverse Unit
(1) When assembling, reverse the order of the above.
(2) When inserting Tray, confirm boss on Slide Cam set to
ditch of the Tray (Compare with right drawing).
CAUTION IN SERVICING
Initialization
Initialization should be performed when the µcom, peripheral parts of µcom, and DVD Main P.W.B. are replaced.
www
How to initialize
At the player is in the state of AC OFF, turn the AC ON with pressing the PLAY ( ) and STOP ( ) buttons simultaneously.
Check that the Standby LED lights orange and the initialization has been activated. (until "INITIALIZE" disappears from
.
the FL display).
Note: All user settings will be lost and its factory setting will be recovered when this initialization is made. So make sure to
memorize your setting for restoring after the initialization.
http://www.xiaoyu163.com
and fixing Damper.
2 3
15P FFC (CX151)
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
3
2
Q Q
3 6 7 1 3 1 5
Slide gear
Tray
co
.
ADV-1000
9 4 2 8
24P FFC (CX241)
3P PH WIRE (CX031)
Damper
DVD Main P .W.B.
0 5 8 2 9 9 4 2 8
Boss
m
9 9
9 9
11