Table of Contents
Advertisement
Troubleshooting
Phenomenon
Indoor unit cannot deliver air
Moisture on air outlet vent
Immediately stop all operations and plug out, contact
the dealer in following situations.
▲
There is harsh sound during operation
▲
The terrible odors emitted during operation
▲
Water is leaking in the room
▲
Air switch or protection switch often breaks
▲
Carelessly splash water or something into air conditioner
▲
There is an abnormal heat in power supply cord and power plug.
Troubleshooting
In HEAT mode, when the temperature of indoor
●
heat exchanger is very low, the unit will stop
delivering air in order to prevent blowing cool air.
In HEAT mode, when the outdoor temperature
●
is low or in high humidity, there is much frost
be formed at the outdoor heat exchanger,
then the unit will automatically defrost, indoor
unit stop blowing air for 8-10min. During the
defrosting, there is water flowing out or vapor be
produced.
In dehumidifying mode, sometimes indoor fan
●
will stop, in order to avoid condensing water be
vaporized again, restrain temperature rising.
If unit is running under the high humidity for a long
time, the moisture will be condensed on the air
outlet grill and drip off.
Stop running and pull out of the plug.
１６
Advertisement
Table of Contents
