Starting the Set Features Program with Commands
To change any of the operational features with commands, you first
need to copy the Set features program from the backup copy of the
Reference Diskette onto your fixed disk or diskette.
If you have not done so, follow the instructions below, otherwise go
to "Commands" on page 64 on how to use the command.
Copying the Set features program
1. Start the Reference Diskette to display the Main Menu (see
"Starting the Reference Diskette" on page 44).
2. Select Set features and press Enter.
Select one:
1. Backup the Reference Diskette
2. Set configuration
3. Set features
4. Set password and network server mode
5. Test the computer
6. Display revision levels
Enter
Operating Your Computer
Main Menu
F1=Help
F3=Exit
62